200W AUTO TUNER, LCD/MTR, 1.8-30MHZ
Click Image For Larger Picture
MFJ-929$ 229.95 Each
|The MFJ-929 IntelliTuner-Compact™ lets you automatically tune any coax fed or random wire antenna 1.8 - 30 MHz at full 200 Watts SSB/CW. It can match 6-1600 Ohms (SWR up to 32:1) - thats a 50% wider matching range at a higher power level than lesser competing products.|
You get a digital SWR/Wattmeter with backlit LCD, antenna switch for 2 antennas, built-in radio interface and built-in internal BiasTee for remote tuner operation.
MFJs exclusive IntelliTune™, Adaptive Search™ and InstantRecall™ algorithms give you ultra-fast automatic tuning with over 20,000 VirtualAntenna™ Memories.
MFJ VirtualAntenna™ Memory
MFJ new VirtualAntenna™ Memory system gives you 4 antenna memory banks for each of 2 antenna connectors. You can select up to 4 antennas on each antenna connector. Each antenna has 2500 memories.
4 Times the Solutions!
MFJ-929 gives you 256 values each of capacitance and inductances for 131,072 matching solutions. Thats 4 times the 32,768 matching solutions of competing products with only 128 L/C values each!
Highly intelligent, ultra-fast tuning!
Don`t be fooled by competing products claiming fast search times -- if you have a quarter of the matching solutions, of course, it takes less time to finish but its not faster.
MFJ`s faster speed comes from advanced technology and software algorithms not from fewer matching solutions.
MFJ`s IntelliTuner-Compact™ actually measures complex impedance -- R and X --of your antenna, computes the L-network values needed and snaps in those components to give you an instant match.
If the load is out of measurement range, AdaptiveSearch™ determines the smaller sub-set from all solutions that can match a safe load -- and then searches only that subset -- others search through far more solutions.
Digital LCD SWR/Wattmeter
An easy-to-read, two-line, 16-character backlit LCD displays SWR, peak or average forward/reflected power, frequency, antenna 1 or 2, L/C tuner values, on/off indicators and other info. They are selected from easy-to-understand menus; not complex combinations of buttons you can`t remember.
A fast-response, high-resolution bargraph gives you an auto-ranging 20/200 Watt power meter. You get 60 segments each for forward and reflected power and 36 segments for SWR -- try that with an 8 segment bargraph that makes you change power ranges and doesnÃ¢â‚¬â„¢t even give you reflected power!
You can read inductance and capacitance directly in uHy and pF. This turns you into an expert L-network designer! Match your load, read the resulting L/C values, then use them to build your fixed L-network.
Or, knowing the L/C values you can determine R and X of the load impedance.
StickyTune™ mode gives you one-hand tuning by locking the TUNE button; just transmit to tune regardless of SWR.
Has audio SWR meter and audio feed back. Competing products don`t. Built-in 50 MHz frequency counter. Its built-in radio interface lets you use a simple wire cable to compatible rigs. Others require a cable with expensive electronics. Binding post for random wire. Self-test. Highly efficient L-network. 10 Amp/1000V relays, RF duty silver mica capacitors.
6 ½" x 2 ¾" x 7 ½". 2.4 lbs. 12-15 VDC/ 1 Amp or 110 VAC with MFJ-1316.
|Pre-wired Rig Interface Cables for MFJ-929, MFJ-928, MFJ-925, MFJ-998|
| MFJ-5114K || Prewired Rig Interface cable for Kenwood TS-590 and other compatibles |
| MFJ-5114I || Prewired Rig Interface cable for Icom and other compatibles |
| MFJ-5114Y || Prewired Rig Interface cable for Yaesu FT-950, FT-450, FT- 847 and compatibles |
| MFJ-5114Y3 || Prewired MFJ-929 to FT-1000MP, FT-9000 Yaesu rigs |
| MFJ-5114Y4 || Prewired MFJ-929 to FT2000 and other Yaesu rigs |MFJ-1910FG POLE, 33FT TELESCOPIC FIBERGLASS POLE$79.95
MFJ-929200W AUTO TUNER, LCD/MTR, 1.8-30MHZ$229.95
MFJ-269CPROHF/VHF/UHF SWR ANALYZER, .530-230 MHZ,430-520$429.95
MFJ-461MORSE CODE READER, POCKET SIZE$89.95