|Customer Reviews for the MFJ-1025.|
|From: Joe w6udo|
|I have been plagued with very strong power line noise (up to 20dB over S9) on HF for the past 6 months or so now. I was thinking I'd have to give up any thoughts of operating even CW, except for very strong stations, until a friend turned me on to this fine device. I hooked it up, followed the directions in the manual and was amazed! Power line hum disappeared and I could hear (and work!) even the weak DX stations again, even with just a 30' "wet noodle" hung out my window as a sense antenna. Mni tnx, MFJ!! Very 73. Joe, w6udo, San Diego, CA. |
|From: JOSEPH |
|TO CLEAR UP THE RECURRING STATIC, AND BUZZING NOISES FOUND IN SHORTWAVE WAS AN EASY TASK FOR THIS MFJ-1025. IT REDUCES THE BACKGROUND NOISE, AND IMPROVES THE SIGNAL CLARITY. COMBINED WITH THE MFJ-1048 IS A GREAT PACKAGE TO RID OF THE NUISANCE SO COMMON IN SHORTWAVE. I RECOMMEND THIS UNIT.|
I BUILT 2 PASSIVE ANTENNA TUNER BOXES WITH A TAPPED COIL, BUT THEY COULD NOT TUNE CORRECTLY DUE TO THE MASS OF COPPER AND ALUMINUM IN MY HOME MADE LOOPS.
THANK YOU MFJ.
|From: John Struemph K1JHS|
|This little jewel works as advertised! Just one caveat, you need to put as much distance between antennas as you can and don't try to run > 100 watts. I managed to cook mine (the replaceable bulb as well as the receive antenna preamp) so I will need to send it in. Before I killed it myself it worked fine business. I have had horrid power line noise here for several year (which the power company is finally addressing) and this unit did a great job of nulling it out. So I am sending mine in (and hopefully get it modded to include a pin diode or relay shunt to ground upon xmit) and look forward to getting it back!! It's a truly great product! 73 de K1JHS|MFJ-1704ANT. SW., 4 POS., 2.5 KW PEP, 0-450 MHZ, GND, LP.$79.95
MFJ-223COLOR GRAPHIC VNA ANTENNA ANALYZER, 1-60MHZ$279.95
MFJ-949ETUNER, 300W, 1.8-30 MHZ, PEAK CROSS METER, DL,$189.95
MFJ-986ANTENNA TUNER, 3 KW, 1.8-30 MHZ, ROLLER, METER,ANT$369.95