0 items

Secure Checkout
FREE! "73 Dipole and Long Wire Antennas", 148 page ebook. Click here!

Product Search
Site Menu

Sister Companies

Associated Companies

 Company News
Call Toll Free: 1-800-647-1800 or Call: 1-662-323-5869
NEW 2017 Summer/Fall Catalog!
Bartlett, TN

April 14, 2018
MFJ to be exclusive US distributor of Messi & Paoloni Coax Cables!
At 9 am GMT every Monday and Tuesday, we will be performing server reboots causing the systems to be down for approximately 10 to 15 minutes!
Click At the Top to join our News Letter! Get information about the world of amateur radio and MFJ Enterprises.
Click Here to Find a ARRL approved Ham License test near you!


$ 339.95 each

Graphical Impedance Antenna Analyzer Review/Demo

MFJ VNA Antenna Analyzer covers 1 to 230 MHz, 1Hz resolution.

•Frequency sweep plots: SWR, Impedance, Resistance, Reactance,Phase Angle, Complex Return Loss, Smith Chart
•Sign of reactance
•Amazing accuracy with OSL(Open-Short-Load) calibration.

New MFJ-226 introduces the MFJ Times Technology series of advanced Antenna Analyzers!

This groundbreaking VNA antenna analyzer -- MFJ-226 Antenna Expert -- delivers OSL calibration and true reactance including its sign from 1 MHz to 230 MHz with 1-Hz frequency resolution!

Incredibly Powerful MFJ-226 is the first and only low-cost handheld VNA(Vector Network Analyzer) to feature OSL(open/short/load) calibration for super accuracy and sign of reactance to positively identify inductive or capacitive reactance.

These two features, normally only found on lab instruments, place incredible diagnostic power in the palm of your hand.

With it, you`ll measure impedance plus many other critical load parameters directly or through a feed-line or test cable with exceptional accuracy, correcting for line loss and phase angle.

Single Frequency Mode
Presents an unusually wide range of load information including . . .
Impedance Magnitude
Series and Parallel Impedance (R±jX)
S11 (Rectangular and Polar)

Swept-Frequency Mode
Generates, displays, captures accurate plots versus frequency of
Impedance (Z)
Resistance (R)
Reactance (±X)
Return Loss (S11)
Phase Angle
Smith Chart
SmithChart plot shows S11 magnitude and phase angle over any frequency span you specify.

32 Memories
32 memories let you capture screens made in the field for download into your PC via mini USB port for later storage and use.

Store OSL Calibrations
You can run OSL calibrations through your test cable or feed-line or at different frequencies and store them for future use.

Fits Your Hand Perfectly
Better doesn`t mean bigger! The MFJ-226`s compact and virtually indestructible molded case fits your hand perfectly with real back-lit keys that depress to give you tactile feedback.

Easy-to-read Backlit LCD
Bright 2 1/2 inch LCD backlit screen is easy-to-read, even in direct sunlight.

Use two AA batteries
Use disposable Alkaline or rechargeable NiMH AA batteries (not included).
Firmware upgradeable via USB port.
Includes N-to-SO-239 adapter and 48-inch mini USB to USB cable.

3 1/4W x 6 1/2H x 1D inches.
9.3 ounces.

Looks, Feels, Performs Like a Professional Instrument

MFJ-226 has both the hefty feel and advanced performance of a professional field-service instrument costing hundreds or even thousands of dollars more.

If you`ve ever wished for the accuracy and flexibility of a professional-grade S11 VNA without the boat-anchor packaging and prohibitive price, your search ends here. The MFJ-226 pulls together the latest advances in RF technology and delivers them to you at a price you can`t afford to pass up!


$ 669.95 each

Ready To Ship!!
Comes with a 2 Year Xiegu warranty!
FCC Type Approved

For Manual/Firmware updates, log into www.cqxiegu.com and register.


MFJ is the exclusive North American Distributor of this new ultra-portable multimode HF transceiver. 

Features a built-in highly efficient automatic antenna tuner, split frequency XCVR function, RIT receive fine tuning, NB noise suppressor, NR digital noise reduction, number notch, and computer-aided control functions. 

Super lightweight and portable, you can take it anywhere! The X5105 is equipped for desktop or handheld use and covers all modes HF + 6-Meters, SSB/CW/AM/FM/RTTY/PSK-31. 

Everything You`re Looking For! That`s what you get with XIEGU`s all-new X5105 ultra-portable multimode QRP transceiver marketed exclusively in the US by MFJ. Compare feature by feature, and you`ll quickly realize it`s like carrying a sophisticated full-sized station transceiver with you -- in your  pocket!

Here are some of the many reasons why you`ll want a X5105:

  • General coverage receiver, 500 kHz to 30 MHz -- plus 6 Meters 5-watts output, all bands, from 160 to 6 Meters (1.5-W AM).

  • All mode operation: SSB, CW, AM, FM, plus digital Smooth tuning, 1-Hz VFO resolution, A/B split  plus RIT Big 3.6" LCD screen with rich display content, Noise Blanker, Digital Noise Reduction, plus Notch Filter!

  • Multiple Band-Pass Filters plus selectable AGC speed Computer interface for digital modes Built-in Keyer and CW trainer, Multi-funcition microphone, Built-in Automatic Antenna Tuner, High-capacity battery pack (3800 mAh)

  • Use as a handy talkie, has built-in speaker microphone.

  • Includes: Multi-purpose handheld microphone, DC power cord, USB cable, service card and instruction manual.

  • Built-in battery charger automatically cuts off when battery is fully charged.

  • Size: 6-5/8" W x 3-5/8" H x 1-7/8" D Weight: 2.1 pounds

  • Exceptionally Low Price: $669.95

Thanks to advanced technology, "QRP" no longer means sacrificing those convenient high-tech operating features that make ham radio fun. Nor do you need to pack a bag full of cables and boxes because the keyer, ATU, and high-capacity battery pack are all built right in.


Other Products that work with this radio
MFJ-564Iambic PaddleClick Here
MFJ-564BIambic PaddleClick Here
MFJ-561Miniature Iambic PaddleClick Here
MFJ-393KProfessional Boom-mic HeadphonesClick Here
MFJ-392BHeadphonesClick Here
MFJ-1709PTT Foot SwitchClick Here
MFJ-281Cleartone speakerClick Here
MFJ-1899TMultimode 80-6 Meters Walkabout AntennaClick Here
MFJ-9231QRPocket GroundClick Here
MFJ-9232QRPocket Loop AntennaClick Here
MFJ-9211QRPocket 4:1 BalunClick Here
MFJ-1806T6 Meter Single Band Walkabout AntennaClick Here
MFJ-1810T10 Meter Single Band Walkabout AntennaClick Here
MFJ-1812T12 Meter Single Band Walkabout AntennaClick Here
MFJ-1815T15 Meter Single Band Walkabout AntennaClick Here
MFJ-1817T18 Meter Single Band Walkabout AntennaClick Here
MFJ-1820T20 Meter Single Band Walkabout AntennaClick Here
MFJ-1830T30 Meter Single Band Walkabout AntennaClick Here
MFJ-1840T40 Meter Single Band Walkabout AntennaClick Here
MFJ-1880T80 Meter Single Band Walkabout AntennaClick Here

Click Here to Join the Xiegu Facebook Page


$ 299.95 each

MFJ-259C 530 KHz - 230 MHz SWR Analyzer
World’s most popular SWR analyzer is super easy-to-use

The famous MFJ-259C gives you a complete picture of your antenna’s performance. You can read your antenna’s SWR and Complex Impedance 530 KHz to 230 MHz continuously with no gaps.

You can read Complex Impedance as series resistance and reactance (R+jX) or as magnitude (Z) and phase (degrees).

Determine velocity factor, coax loss in dB, coax length and distance to a short/open.

Read SWR, return loss and reflection coefficient at any frequency simultaneously.

You can read inductance in uH and capacitance in pF at RF frequencies.

Large easy-to-read two line LCD screen and side-by-side analog meters clearly display your information.

Built-in frequency counter, Ni-MH/Ni-CD charger circuit, battery saver, low battery warning and smooth reduction drive tuning.

Super easy to use! Just set the bandswitch and tune the dial -- just like your transceiver. SWR and Complex Impedance are displayed instantly!

Here’s what you can do

Find your antenna’s true resonant frequency. Trim dipoles and verticals.

Adjust your Yagi, quad, loop and other antennas, change antenna spacing and height and watch SWR, resistance and reactance change instantly. You’ll know exactly what to do by simply watching the display.

Perfectly tune critical HF mobile antennas in seconds for super DX -- without subjecting your transceiver to high SWR.

Measure your antenna’s 2:1 SWR bandwidth on one band, or analyze multiband performance.

Check SWR outside the ham bands without violating FCC rules.

Take guesswork out of building and adjusting matching networks and baluns.

Accurately measure distance to short or open in failed coax. Measure length of a roll of coax, coax loss, velocity factor and impedance.

Measure inductance, capacitance. Troubleshoot and measure resonant frequency, Q of traps, stubs, transmission lines, chokes, tuned circuits, baluns.

Adjust your antenna tuner for a perfect 1:1 match without creating QRM.

MFJ-259C is a complete ham radio test station with frequency counter, RF signal generator, SWR/Resistance/Reactance/Coax Analyzer, Capacitance/Inductance Meter and much more!

Use 10 AA or Ni-MH batteries (not included) or 110 VAC with optional MFJ-1312D.

Compact 4W x 6 3/4H x 2D inches


$ 229.95 each
The MFJ-929 IntelliTuner-Compact™ lets you automatically tune any coax fed or random wire antenna 1.8 - 30 MHz at full 200 Watts SSB/CW. It can match 6-1600 Ohms (SWR up to 32:1) - thats a 50% wider matching range at a higher power level than lesser competing products.

You get a digital SWR/Wattmeter with backlit LCD, antenna switch for 2 antennas, built-in radio interface and built-in internal BiasTee for remote tuner operation.

MFJs exclusive IntelliTune™, Adaptive Search™ and InstantRecall™ algorithms give you ultra-fast automatic tuning with over 20,000 VirtualAntenna™ Memories.

MFJ VirtualAntenna™ Memory

MFJ new VirtualAntenna™ Memory system gives you 4 antenna memory banks for each of 2 antenna connectors. You can select up to 4 antennas on each antenna connector. Each antenna has 2500 memories.

4 Times the Solutions!

MFJ-929 gives you 256 values each of capacitance and inductances for 131,072 matching solutions. Thats 4 times the 32,768 matching solutions of competing products with only 128 L/C values each!

Highly intelligent, ultra-fast tuning!

Don`t be fooled by competing products claiming fast search times -- if you have a quarter of the matching solutions, of course, it takes less time to finish but its not faster.

MFJ`s faster speed comes from advanced technology and software algorithms not from fewer matching solutions.

MFJ`s IntelliTuner-Compact™ actually measures complex impedance -- R and X --of your antenna, computes the L-network values needed and snaps in those components to give you an instant match.

If the load is out of measurement range, AdaptiveSearch™ determines the smaller sub-set from all solutions that can match a safe load -- and then searches only that subset -- others search through far more solutions.

Digital LCD SWR/Wattmeter

An easy-to-read, two-line, 16-character backlit LCD displays SWR, peak or average forward/reflected power, frequency, antenna 1 or 2, L/C tuner values, on/off indicators and other info. They are selected from easy-to-understand menus; not complex combinations of buttons you can`t remember.

A fast-response, high-resolution bargraph gives you an auto-ranging 20/200 Watt power meter. You get 60 segments each for forward and reflected power and 36 segments for SWR -- try that with an 8 segment bargraph that makes you change power ranges and doesn’t even give you reflected power!

You can read inductance and capacitance directly in uHy and pF. This turns you into an expert L-network designer! Match your load, read the resulting L/C values, then use them to build your fixed L-network.
Or, knowing the L/C values you can determine R and X of the load impedance.

StickyTune™ mode gives you one-hand tuning by locking the TUNE button; just transmit to tune regardless of SWR.

Has audio SWR meter and audio feed back. Competing products don`t. Built-in 50 MHz frequency counter. Its built-in radio interface lets you use a simple wire cable to compatible rigs. Others require a cable with expensive electronics. Binding post for random wire. Self-test. Highly efficient L-network. 10 Amp/1000V relays, RF duty silver mica capacitors.

6 ½" x 2 ¾" x 7 ½". 2.4 lbs. 12-15 VDC/ 1 Amp or 110 VAC with MFJ-1316.

Autotuner Interface Cables
MFJ-5114AMost Alinco
MFJ-5114KMost Kenwood
MFJ-5114IMost Icom
MFJ-5114YMost Yaesu
MFJ-5114Y2Yaesu FT-847 (MFJ-92X models only)
MFJ-5114Y3Yaesu FT-1000MP/2000/9000
MFJ-5114Y4Yaesu FT-2000 (through TX REQ input)


$ 299.95 each
MFJ-223 1-60 MHz Color Graphic VNA Analyzer

Pocket-Size, Incredible Performance! Truly accurate SWR, R, X and Z!

This pocket-sized wonder breaks the mold for analyzer design with user-friendly convenience, top notch accuracy, and a vivid TFT multi-color display. Don`t let the size fool you, MFJ-223 is packed with all the VNAfeatures and performance you need!

For example, get data for SWR, resistance (R), reactance (X), and impedance magnitude (Z) delivered on a color-coded high-resolution bar-graph display or sharply defined swept-frequency plots.

Get continuous DDS frequency coverage with 100-Hz resolution and a full selection of tuning steps and sweeps.

There`s a movable marker that calls up alpha-numeric data for any point on any plot -- and a memory to capture current data when you turn the analyzer off.

Get other useful features too, like a built in help menu and a field-strength indicator warns when powerful interference is present.

Best of all, juggling batteries is a thing of the past -- a long-running lithium-polymer power source is built right in. Recharge via any USB port.

Checkout these specifications:
• Single-frequency and swept frequency operating modes
• Truly accurate SWR, R, X, and Z measurements
• Seamless DDS coverage with 100-Hz resolution from 1-60 MHz
• Smooth "skip-free" encoder tunes fast or slow without missing a step
• Powerful +5-dBm stimulus generator overrides local interference
• Field-strength meter measures local signals, detects potential interference
• DDS generator precision signal source
• Vivid 1600-pixel/inch color graphics on a 2x2 inch non-glare TFTscreen
• High-lumen output, easy to read in direct sunlight
• Easy setup, only four control switches with convenient on-screen soft menus
• Personalized ID function programs your call or name onto the display
• Built-in 3.7-V 1800- mAH lithium-polymer battery charges with Battery Status Indicator and Auto Shut-off.
Optional MFJ-5431, Micro USB to USB Charge Cable.

• Charge % always displayed, multi-color LED monitors charge status
• Built-in clock shows elapsed time when unit is turned on
• Breakthrough miniaturization

2 3/4W x 3 1/2H x 1 3/8D" high-impact case, 5.1 oz.

• Has BNC connector.

BNC Male to SO-239 Adapter Included, MFJ-7708


$ 149.95 each
The MFJ-941E gives you a 300 Watt antenna tuner that covers everything from 1.8 - 30 MHz -- plus you get a lighted Cross-Needle meter with on/off switch, antenna switch and a 4:1 balun! (The light uses 12 VDC or 110 VAC with MFJ-1312D)

MFJs lighted Cross-Needle meter shows SWR, forward and reflected power all at a glance in 300/60 and 30/6 watt ranges, 8 position antenna switch lets you select 2 coax lines, random wire/balanced line or dummy load (direct or through).

An efficient 12 position airwound inductor gives lower losses and more power out. Has 4:1 balun, 1000 Volt capacitors. The beautiful aluminum cabinet has a durable scratch-proof multicolor Lexan front panel matches your rig perfectly and fits right into your station.


$ 159.95 each
Due to the telescoping fiberglass mast size after being fully extended the capacity is capped at 15lbs. This mast will extend up to 18 feet! The base extends to 693 inches squared.

- 7.8` extended, 1.4" diameter.

- 54" collapsed, 6" diameter.

- 9 ¾ lbs.

Telescoping Mast
- 18` extended, ¾" diameter top, 1 ½" diameter bottom.

- 5` collapsed, 1 ½" diameter.

- 15 lbs.

The MFJ-1919 comes without the extendable telescoping mast.

The MFJ-1918EX is smaller, lighter, and and more portable antenna tripod.


$ 139.95 each
Covers 1.8 to 60 MHZ
New! Now covers 6-meter band and has antenna bypass Switch!

Dont go mobile without it!
Dont leave home without this mobile tuner! Have an uninterrupted trip as MFJ-945E extends antenna bandwidth and eliminates needs to stop, go outside and read just your mobile whip. Handles 300 Watts.

Super Compact Size
The small 8W x 2H x 6D inch black aluminum cabinet uses little room. The Cross-Needle meter shows SWR, forward and reflected power -- at a glance. It reads forward/reflected power in 300/60 and 30/6 Watt ranges. ON/OFF lamp switch. Requires 12 volts for lamp. (MFJ-1312D)

Fast, easy tuning
Convenient placement of controls makes tuning fast and easy while in motion. Antenna switch lets you bypass tuner and still use the SWR/Wattmeter.
Back panel has SO-239 connectors for transmitter and coax and a wing nut post for your ground.

1000 Volt capacitors
Efficient airwound inductor gives you lower losses and more Watts out. 1000 Volt capacitors. Covers 1.8 to 60 MHz. Use it at home in your base station when youre not in your RV, boat or car.

Mobile Mounting Bracket
A mobile mount, MFJ-20 can be purchased as well.


$ 189.95 each
More Hams use MFJ-949s than any other antenna tuner in the world! Why? Because the worlds leading antenna tuner has earned a worldwide reputation for being able to match just about anything.

Full 1.8-30MHz Operation
Custom designed inductor switch, 1000 volt tuning capacitors, Teflon insulation washers and proper L/C ratio gives you arc-free no worries operation with up to 300 Watts 1.8 to 30 MHz.

Tunes any Antenna
Tunes out SWR on dipoles, verticals, inverted vees, random wires, beams, mobile whips, shortwave receiving antennas.... Nearly anything! Use coax, random wire or balanced lines. Has heavy duty 4:1 balun.

Custom Inductor Switch
The inductor switch is the most likely component to burn up in any antenna tuner. MFJs inductor switch in the MFJ-949E was custom designed to withstand the extremely high RF voltages and currents that are developed in your tuner.

8 Position Super Antenna Switch
Lets you select two coax fed antennas, random wire/balanced line or built-in dummy load through your MFJ-949E or direct to your transceiver.

More hams use MFJ-949s than any other antenna tuner in the world!
Has MFJs full size 3 inch lighted Cross Needle Meter (not a puny "meter" you cant read). Lets you easily read SWR, true peak forward and average reflected power simultaneously on 300 Watt or 30 Watt ranges. Lamp has on/off switch, requires 12 VDC or 110 VAC with MFJ-1312D, $14.95

QRM-Free PreTune
MFJs QRM-Free PreTune lets you pre-tune your MFJ-949E off-the-air into its built-in dummy load! Makes tuning your actual antenna faster and easier.

Plus much more!
Full size built-in non-inductive 50 Ohm dummy load, scratch-proof Lexan multi-colored front panel, superior cabinet and construction and more!


$ 409.95 each
MFJ-989D 1500 Watt legal limit Antenna Tuner

New and improved! World’s most popular legal limit antenna tuner just got better -- with no increase in price! You get better efficiency, lower losses, and a new true peak-reading meter. Easily handles full 1500 Watts SSB/CW, 1.8 to 30 MHz including MARS/WARC bands.

• New 500 pFair variable capacitors
• New AirCoreTM Roller Inductor with new fast-tune Crank Knob
• New TrueActiveTM Peak-Reading Cross-Needle SWR/Wattmeter with new Super-bright LED
• New High-Voltage Current Balun
• New rugged Cabinet maintains hi-Q

Made in the U.S.A.

The world’s most popular legal limit antenna tuner just got better -- much better -- with no increase in price!
You get better efficiency, lower losses and a new true peak reading SWR/Wattmeter. It easily handles full 1500 Watts SSB/CWand covers 1.8 to 30 MHz, including MARS and WARC bands into balanced or unbalanced loads.
You can match dipoles, verticals, inverted vees, random wires, beams, balanced lines, coax, mobile whips, shortwave -- nearly any antenna.
You get everything you’ve ever wanted in a high power, full featured antenna tuner -- extremely wide matching range, lighted Cross-Needle SWR/Wattmeter, antenna switch, dummy load and balun.

Massive Transmitting Capacitors
New huge 500 pF air variable capacitors give you twice the capacitance for much more efficient operation on 160 and 80 Meters.
Specially shaped plates give low minimum capacitance resulting in an extremely wide matching range -- 160 thru 10 Meters.
New larger, more attractive capacitor knobs with easy-to-see dials make tuning much easier and precise.

MFJ AirCore Roller Inductor with new fast-tune Crank Knob
New and improved AirCore Roller Inductor gives you lower losses, higher Q and handles more power with no self-resonances. It gives you cool, efficient and smooth tuning on all bands and it’s air core can’t burn up!
Large, self-cleaning wiping contact gives excellent low-resistance connection without contact arcing or burning.
New fast-tunecrank knob lets you reset your roller inductor quickly, smoothly and accurately.
A precision gear driven 3-digit turns counter lets you accurately reset your roller inductor for quick band changing.

TrueActive Peak Reading SWR/Wattmeter
New TrueActive peak reading SWR/Wattmeter lets you read true peak or average power on all modes. Large, easy-to-read super-bright LED lighted Cross Needle meter lets you read SWR and forward/reflected (3000/300 Watt ranges) power at a single glance. Uses 9-Volt battery and/or 12 VDC or 110 VAC with MFJ-1312D.

MFJ High Voltage Current Balun
New high voltage current balun lets you tune high and low impedance balanced lines without core saturation or voltage breakdown.
It’s constructed with two giant 2 1/2 inch toroid cores and wound with high voltage wire connected to high-voltage glazed ceramic feedthrough insulators.

Super Antenna Switch
MFJ-989D’s super heavy duty antenna switch is made of two individual ceramic wafers wired in parallel. Extra wide spaced, heavy duty contacts handle extreme voltages and currents. We’ve never burned one up!
You can select two coax antennas (directly or through tuner), balanced line/random wire, or built-in dummy load.

Built-in Dummy Load
A full-size 300 Watt non-inductive 50 Ohm dummy load is built-in.

You’ll find it handy for transmitter tuning, testing and repairing rigs, setting power level, adjusting mic gain and more.

New Cabinet maintains high Q
New roomy cabinet helps maintain components’ high Q. Vent holes keeps components cool. Super construction -- non-stripping PEM nuts, wing-nut ground post, fire-retardant epoxy glass PC board, and heavy gauge wire throughout. Measures 12 7/8W x 6H x 11 5/8D inches.

Lexan Front Panel
The MFJ-989D has a new nearly indestructable multi-color Lexan front panel. Its detailed logging scales and legends will be legible for a lifetime of DXing.

Wide Range T-Network
The MFJ-989D uses the time-tested wide range T-Matching Network. It gives you the widest matching range and is the easiest to use of all matching networks. With MFJ’s new high value 500 pF air variable capacitors and new low loss roller inductor, it easily handles high power efficiently.


$ 229.95 each

The MFJ-969 Antenna Tuner gives you MFJs superb AirCore Roller Inductor and full 6 meteres through 160 Meter coverage!
You get everything youve ever wanted including...300 Watts PEP SSB full featured antenna tuner, widest matching range, full size lighted Cross-Needle SWR/Wattmeter reads true peak forward power, QRM-Free PreTune, 8 Position antenna switch, built in 50 Ohm dummy load, heavy duty 4:1 balun -- all in a tough, attractive cabinet. MFJs famous 1 year No Matter What warranty.

The MFJ-969 Antenna Tuners AirCore Roller Inductor, gear driven turns counter and spinner knob gives you exact inductance control for absolute minimum SWR. MFJs exclusive AirCore Roller Inductor has an air core that cant burn up! You get ultra-high-Q, the lowest loss, highest efficiency and highest power handling of any roller inductor in ham radio.

MFJs exclusive Self-Resonance Killer Keeps potentially damaging self-resonances away from your frequency. Huge self-cleaning wiping contact gives you excellent low-resistance connection without contact arcing or burning.
Solid 1/4 inch brass shaft, self-align bearings -- smooth non-binding operation.

The MFJ-969 Antenna Tuner covers all frequencies from 160 Meters thru 6 Meters, including the "magic band" -- the widest matching range of any full featured antenna tuner. Match dipoles, verticals, inverted vees, random wires, beams, mobile whips, SWL receiving antennas -- nearly any antenna. You can use coax cable, random wire or balanced lines. Has heavy duty 4:1 balun.

MFJs new ActivePeak reading Circuit accurately reads true peak forward power -- an MFJ exclusive.

MFJs lighted Cross Needle SWR/Wattmeter reads SWR, true peak forwards and average reflected power simultaneously on 300 Wat or 30 Watt ranges.
Lamp has on/off switch and uses 12VDC or 110 VAC with MFJ-1312D ActivePeakReading Circuit can also use a 9 volt battery.

MFJs 8 positions let you select two coax fed antennas, random wire/balanced line or built-in dummy load for use through your MFJ-969 or direct to your rig.
MFJs QRM-Free-PreTune lets you pre-tune MFJ-969 off the air into a built in dummy load without causing QRM. Pre-tuning into a dummy load makes tuning your actual antenna quick and easy!

The MFJ-969 Antenna Tuner has a full size non-inductive 50 Ohm dummy load. Youll find it handy for tuning, testing, repairing rigs, setting power level, adjusting mic gain, etc.

The MFJ-969 has a new tough aluminum case has a scratch proof multi-colored lexan front panel. It measures a compact 3½H x 10½D x 9½W inches.


$ 49.95 each
Covers all bands, 160-10 Meters with antenna tuner. 102 feet long, shorter than 80 Meter dipole. Use as inverted vee or sloper to be more compact. Use on 160 Meters as Marconi with tuner and ground. Handles full legal limit power. Add coax feedline -- get on the air!

AUTO TUNER, 1.5KW, 1.8-30 MHZ

$ 699.95 each
MFJ 1500 Watt Legal Limit IntelliTuner

Full 1500 watts SSB/CW…Digital & Analog SWR/WattMeter . . .
All features of MFJ IntelliTuners-- Ultra-fast, Safe Automatic Tuning . . . Wide Tuning Range (12-1600 Ohms from 1.8 to 30 MHz ) . . . Radio Interfaces . . . Built-in Antenna Switch for two coax/long wire . . . Automatic Bypass protects your amplifier . . . Field Upgradeable Software . . . Very Compact!

The MFJ-998 Full Legal Limit 1500 Watt Intellituner takes you to the final level in automatic antenna tuners. With a capability of 1500 watts SSB and CW, coupled with automatic tuning, your high-power station can now operate essentially hands-free even when frequency and band changes are made.

Fast Automatic Tuning

The MFJ-998 instantly matches impedances from 12-1600 ohms using MFJ`s exclusive IntelliTune, AdaptiveSearch and InstantRecall algorithms with over 20,000 VirtualAntenna Memories. When you key your transmitter, MFJ`s InstantRecall checks to see if that frequency has been used before. If so, tuning is instantaneous. If not, MFJ`s IntelliTune algorithm (based on MFJ`s efficient SWR Analyzer technology) measures the impedance, snaps the necessary components in place, and then fine-tunes the SWR. If the antenna impedance is outside the tuner`s measurement range, MFJ`s Adaptive Search algorithm measures the frequency and determines only relevant component values -- which are then searched for fast tuning.

Safe Automatic Tuning and Amplifier Protection

The MFJ-998 includes MFJ’s Amplifier Bypass Control -- an MFJ exclusive feature! When used with a transceiver interface cable, tuning is safe and "stupidproof"! When a tuning cycle is initiated, the MFJ-998 first bypasses any in-line amplifier. Next, the MFJ-998 initiates a low-power CW tuning carrier from your transceiver. When tuning is complete, the MFJ-998 reverts your transceiver to its prior power and mode, and re-enables the amplifier. This entire cycle typically takes less than a second! Finally, if the MFJ-998 cannot find a match better than a preset amplifier SWR trip-point, the amplifier stays bypassed to provide automatic SWR protection for your amplifier -- another MFJ exclusive!

Analog SWR/Wattmeter

A large analog Cross-Needle SWR/Watt-meter displays selectable 300/60 watt or 3000/600 watt forward/reflected full-scale ranges. You can even select automatic power ranging -- the best power range is automatically selected for you.

Digital LCD SWR/Wattmeter

A two-line, 16-character backlit LCD meter displays SWR, forward/reflected power, frequency, antenna selected, an auto-ranging bargraph power indication,
and much more. You can even read the final matching inductor and capacitor values should you want to build your own fixed matching network. Simple menus
determine displayed information - no complex button combinations to remember!

MFJ VirtualAntenna Memory

MFJ new VirtualAntenna Memory system gives you 4 antenna memory banks for
each of 2 switchable antenna connectors. Select up to 4 antennas on each antenna connector. Each antenna has 2500 memories, 20,000 total. Has two coax connectors and a binding post for end-fed long wire antennas.

Download and Upgrade Remotely

Field upgradeable firmware via the serial port -- download and upgrade your MFJ-998 as new features are introduced!

Plus Much More!

Built-in radio interface provides control of most amateur transceivers.

Automatic bypassing when excessive tuning power or power in excess of 1500 watts is applied.

Use balanced line antennas with external MFJ-912, 1.5 kW 4:1 balun.

MFJ-998 is the smallest full legal-limit auto-tuner in the world! 13Wx4Hx15D
inches fits easily into your ham station. Weighs just 8 pounds -- great portability! Requires 12-15VDC at 1.4 amps maximum or 110 VAC with MFJ-1316.

Pre-wired Rig Interface
Cables for MFJ-929/998

These cables work with the following MFJ Automatic tuners: MFJ-929, MFJ-928, MFJ-925, and the MFJ-998.

MFJ-5114K Prewired Rig Interface cable for Kenwood and compatibles.
MFJ-5114I. Prewired Rig Interface cable for Icom and compatibles.
MFJ-5114Y. Prewired Rig Interface cable for Yaesu and compatibles.
MFJ-5114Y3. Prewired MFJ-929 to FT-1000MP, FT-9000 Yaesu rigs.
MFJ-5114Y4. Prewired MFJ-929 to FT2000 Yaesu rigs.


$ 319.95 each
Why settle for a mere 300 Watt antenna tuner when a few extra dollars lets you add real power when youre ready? The MFJ-962D lets you use your barefoot rig now. When youre ready . . you can add a powerhouse linear amplifier at no additional cost. The compact MFJ-962D handles 1500 Watts PEP SSB amplifier input power (800 Watts PEP SSB amplifier output power). Its perfect for Ameritrons best selling 800 Watt AL-811H or 600 Watt AL-811 amplifiers!

MFJ-962D is new and improved! New features include MFJs AirCore Roller Inductor, new aluminum-skirted knob set including a weighted deluxe spinner knob, ultra compact size (10.75 x 4 x 10.875 inches) and scratch-proof multi-colored Lexan front panel. Two transmitting tuning capacitors and MFJs exclusive AirCore roller inductor gives you precise control to get your SWR down to an absolute minimum.

You get an extremely wide matching range from 1.8 to 30 MHz continuously including MARS and WARC bands.MFJs AirCore roller inductor has an air core that cant burn up. You get ultra high-Q, low loss and MFJs exclusive Self-Resonance Killer that eliminates damaging self-resonances.

MFJs lighted peak and average reading Cross-Needle SWR/Wattmeter makes tuning quick and easy. At one glance you can read SWR, forward and reflected power in two power ranges. Meter light uses 12 VDC or 110 VAC with MFJ-1312D. A 6-position ceramic antenna switch lets you select 2 coax lines (direct or through tuner), random wire and balanced lines. You get a heavy duty MFJ TrueCurrentBalun for balanced lines. High-voltage ceramic feedthru insulators let you operate high power into balanced feedlines.


$ 199.95 each
Wipe out noise and interference before it gets into your receiver with a 60 dB null!

Eliminate all types of noise -- severe power line noise from arcing transformers and insulators, fluorescent lamps, light dimmers, touch controlled lamps, computers, TV birdies, lightning crashes from distant thunderstorms, electric drills, motors, industrial processes.

It’s more effective than a noise blanker because interference much stronger than your desired signal can be completely removed without affecting your signal.

It works on all modes -- SSB, AM, CW, FM, frequences from BCB to lower VHF.

Null out strong QRM on top of weak rare DX and then work him! You can null out a strong local ham or AM broadcast station to prevent receiver from overloading.

Use MFJ-1026 as an adjustable phasing network. You can combine two antennas to give you various directional patterns.

Null out a strong interfering signal or peak a weak signal at a push of a button.

Easy-to-use! Plugs between transmitting antenna and transceiver. To null, adjust amplitude and phase controls for minimum S-meter reading or lowest noise. To peak, push reverse button.

Use built-in active antenna or an external one. MFJ’s exclusive Constant Amplitude Phase Control makes nulling easy.

RF-sense T/R switch automatically bypasses your transceiver when you transmit. Adjustable delay time. 12 VDC or 110 VAC with MFJ-1312D. Measures 6 1/2 X 1 1/2 X 6 1/4 inches.

$269.95 each

$199.95 each

$189.95 each

BALUN, 1:1, 1.8-30MHZ, 1.5KW
$29.95 each

All information, images, and documents on this website are the sole property of MFJ Enterprises, Inc. Any reuse or redistribution of the contents of this website are strictly forbidden without authorization from MFJ Enterprises, Inc.
LMR is a Registered Trademark of Times Microwave Systems!
Enter your callsign to see if you have an eQSL waiting!