0 items

Secure Checkout
All CategoriesANALYZERSANTENNASM&P COAXIAL CABLECABLESNEW PRODUCTSREMOTE SHACK

Product Search
Site Menu

Sister Companies

Associated Companies






 Company News
Call Toll Free: 1-800-647-1800 or Call: 1-662-323-5869
NEW 2017 Summer/Fall Catalog!
Helena Hamfest
Helena, AL

Oct 21, 2017
COMPANY NEWS:
(NEW) MFJ All-Band 80-10 Meter End-Fed Half-wave Antennas!
MFJ to be exclusive US distributor of Messi & Paoloni Coax Cables!
SITE NEWS:
At 9 am GMT every Monday and Tuesday, we will be performing server reboots causing the systems to be down for approximately 10 to 15 minutes!

** FEATURED PRODUCTS **
MFJ-226
1-230 MHZ ANTENNA EXPERT TIMES GRAPHIC ANALYZER

$ 339.95 each


Graphical Impedance Antenna Analyzer Review/Demo

MFJ VNA Antenna Analyzer covers 1 to 230 MHz, 1Hz resolution.

•Frequency sweep plots: SWR, Impedance, Resistance, Reactance,Phase Angle, Complex Return Loss, Smith Chart
•Sign of reactance
•Amazing accuracy with OSL(Open-Short-Load) calibration.

New MFJ-226 introduces the MFJ Times Technology series of advanced Antenna Analyzers!

This groundbreaking VNA antenna analyzer -- MFJ-226 Antenna Expert -- delivers OSL calibration and true reactance including its sign from 1 MHz to 230 MHz with 1-Hz frequency resolution!

Incredibly Powerful MFJ-226 is the first and only low-cost handheld VNA(Vector Network Analyzer) to feature OSL(open/short/load) calibration for super accuracy and sign of reactance to positively identify inductive or capacitive reactance.

These two features, normally only found on lab instruments, place incredible diagnostic power in the palm of your hand.

With it, you`ll measure impedance plus many other critical load parameters directly or through a feed-line or test cable with exceptional accuracy, correcting for line loss and phase angle.

Single Frequency Mode
Presents an unusually wide range of load information including . . .
SWR
Frequency
Impedance Magnitude
Series and Parallel Impedance (R±jX)
S11 (Rectangular and Polar)
Capacitance
Inductance

Swept-Frequency Mode
Generates, displays, captures accurate plots versus frequency of
SWR
Impedance (Z)
Resistance (R)
Reactance (±X)
Return Loss (S11)
Phase Angle
Smith Chart
SmithChart plot shows S11 magnitude and phase angle over any frequency span you specify.

32 Memories
32 memories let you capture screens made in the field for download into your PC via mini USB port for later storage and use.

Store OSL Calibrations
You can run OSL calibrations through your test cable or feed-line or at different frequencies and store them for future use.

Fits Your Hand Perfectly
Better doesn`t mean bigger! The MFJ-226`s compact and virtually indestructible molded case fits your hand perfectly with real back-lit keys that depress to give you tactile feedback.

Easy-to-read Backlit LCD
Bright 2 1/2 inch LCD backlit screen is easy-to-read, even in direct sunlight.

Use two AA batteries
Use disposable Alkaline or rechargeable NiMH AA batteries (not included).
Firmware upgradeable via USB port.
Includes N-to-SO-239 adapter and 48-inch mini USB to USB cable.

3 1/4W x 6 1/2H x 1D inches.
9.3 ounces.

Looks, Feels, Performs Like a Professional Instrument

MFJ-226 has both the hefty feel and advanced performance of a professional field-service instrument costing hundreds or even thousands of dollars more.

If you`ve ever wished for the accuracy and flexibility of a professional-grade S11 VNA without the boat-anchor packaging and prohibitive price, your search ends here. The MFJ-226 pulls together the latest advances in RF technology and delivers them to you at a price you can`t afford to pass up!









MFJ-939I
PLUG,PLAY,200W AUTOTUNER, HF,W/CABLE,ICOM


$ 159.95 each


Plug & Play Auto Tuner

Plug & Play! You won’t even know it’s there . . . MFJ-939I/K/Y automatically tunes your antenna as you tune your radio. SWR is just always low.

Tunes your coax fed or random wire antennas 1.8-30 MHz from 2 Watts QRP to full 200 Watts SSB/CW.

Matches 6-1600 Ohms (SWR up to 32:1) -- that’s a 50% wider matching range than competing products that are less capable and higher priced . . . and it’s made in the USA.

Highly intelligent, ultra-fast tuning!
As you’re ragchewing, contesting or DXing, the MFJ-939 is learning your antenna and the way you operate and storing all this in its 20,000 memories. The more you use it, the more it learns.

Measure & Compute = Instant Match
MFJ-939 uniquely measures your antenna’s complex impedance (R, X), computes the L-network and snaps in needed components for instant matching.

AdaptiveSearch
AdaptiveSearch determines a sub-set of all solutions that can provide a safe match and searches only that subset giving
you an ultra fast match. Others search slowly through all solutions.

InstantRecall
InstantRecall first checks its memory to see if you have operated this frequency before. If so, tuning is instantaneous and you’re ready to go!

MFJ VirtualAntenna Memory
MFJ exclusive VirtualAntenna Memory system gives you 8 antenna memory banks of 2500 memories each.
You can use an antenna switch to select up to 8 antennas and assign each antenna its own 2500 memories!

4 Times More Solutions and Faster!
MFJ has 256 values each of capacitance and inductance for 131,072 matching solutions giving you a finely tuned very low SWR. That`s 4 times the 32,768 solutions of competitors using only 128 L/C values each!
Don`t be fooled by competing products claiming fast search times -- if you have a quarter of the matching solutions, of course,it takes less time to finish but it`s not faster.
MFJ`s faster speed comes from advanced technology and software algorithms not from fewer solutions.

Audio SWR Meter
An Audio SWR meter beeps when SWR <1.5, 2, 2.5, 3. Alarms if >3. Audible & Visible Diagnostic messages.

Heavy-Duty Components
Heavy-duty L-network: 10 Amp/1000V relays, RF duty silver mica caps won’t burn up. Safe, reliable, continuous 200W SSB/CW.

As Small as Your Radio
Tiny 6 1/2W x 2 7/8H x 8 3/8D”. 2.4 lbs. SO-39s, random wire ant. & gnd posts.

Never Obsolete . . . Super Versatile
Truly Plug & Play! No settings, only one cable to plug in! Order MFJ-939I, Icom; MFJ-939K, Ken; MFJ-939Y, Yaesu. Specify Yaesu: FT-100/450/950/ 857/897/1000MP/9000/2000 or other.

Never Obsolete!

If you get a new transceiver, simply order a new Plug and Play cable.

Super Versatile! Works with ALL older rigs, classic transmitters, Flex, Elecraft, Tentec, QRP, others. Auto tune antenna -- touch tune button on any MFJ-939I/K/Y for any rig.

2-Year NoMatterWhatWarranty









MFJ-1835
COBWEB,HF,1/2 WAVE, 5-BD,10,12,15,17,20 M,300W


$ 219.95 each
1/2-wave, 5-Band HF Cobweb Antenna

Restricted space spoiling your operating fun? MFJ-1835 puts your call back on the map!

This fiveband (20, 17, 15, 12, 10 Meters) half-wave open-loop is perfect for restricted space or portable operation.

Sky-gray fiberglass spreaders and nearly invisible wire elements (13ft diagonal), blend in with your surroundings while standing tough against nasty weather.

Horizontally polarized for less local noise pickup plus solid gain over verticals.

No radials needed! Low SWR is due to MFJ’s exclusive Spider-Match broadband network.

Up to 5 dBi gain will allow you to work DX easily -- even on QRP.

Radiation pattern is nearly omni-directional so you don’t need a rotator.

Use lightweight TV hardware to mount it on your chimney, balcony, fence post or other. SO-239 feedpoint.

It’s small in size, just 8 lbs., low in cost, but big on performance. Let the MFJ-1835 turn your space problem into a fresh stack of QSL cards from far away places.




MFJ-269C
HF/VHF/220MHZ/UHF,.530-230,415-470MHZ,SWR ANALYZER


$ 399.95 each
530KHz-230MHz plus 415-470MHz HF/VHF/UHF SWR Analyzer



Covers 530 KHz-230 MHz and 415-470 MHz . . . SWR . . . Complex RFImpedance: Resistance(R)
and Reactance(X) or Magnitude(Z) and Phase(degrees) . . . Coax cable loss(dB) . . . Coax cable
length and Distance to fault . . . Return Loss . . . Reflection Coefficient . . . Inductance . . . Capacit-
ance . . . Battery Voltage. LCD digital readout . . . frequency counter . . . side-by-side meters . . . Ni-
MH/Ni-Cad charger circuit . . . battery saver . . . low battery warning . . . smooth reduction drive . . .

MFJ-269C covers 530KHz to 230 MHz and 415 to 470 MHz -- an MFJ-269C exclusive! Includes all the features of MFJ-259C, the world’s most popular SWR Analyzer plus much more!

Large easy-to-read two line LCD display and side-by-side meters clearly display your
information. Built-in Ni-Cad/Ni-MH charger circuit, battery saver, low battery warning, smooth reduction drive tuning.Use as signal source for testing/alignment.

Built-in CoaxCalculator -- calculates coax line length in feet given coax length in electrical degrees and vice versa for any frequency and any velocity factor (great for building matching sections and phasing lines) -- an MFJ-269C exclusive!

New 12-bit A/D converter gives much better accuracy and resolution than common 8-bit A/D converters -- an MFJ-269C exclusive!

Super easy to use! Just set the bandswitch and tune the dial -- just like your transceiver.

530 KHz to 230 MHz Range Features

MFJ-269C gives you a complete picture of your antenna. Read antenna SWR and Complex Imped-ance 530 KHz to 230 MHz. Built-in frequency counter.

Lower band is retuneable to cover 470-940 KHz for maritime and 600 Meters.

Read Complex Impedance as series equivalent resistance and reactance (Rs+jXs) or as magnitude (Z) and phase (degrees).

Also reads parallel equivalent resistance and reactance (Rp+jXp) --MFJ-269C exclusive!

Determine velocity factor, coax loss in dB, length of coax and distance to short/open in feet.

Read SWR, return loss and reflection coefficient at any frequency simultaneously at a single glance. Also reads match efficiency.

Also read inductance in uH and capacitance in pF at RF frequencies.

Measure SWR and loss of coax with any characteristic impedance, 10 to over 600 Ohms, including 50, 51, 52, 53, 73, 75, 93,95,300,450 Ohms -- MFJ-269C exclusive!

415 to 470 MHz Range features

Just plug in your UHF antenna coax, set the frequency and read SWR, return loss and reflection coefficient simultaneously. You can read coax cable loss in dB and match efficiency.

You can adjust UHF dipoles, verticals, yagis, quads and other antennas and determine their SWR, resonant frequency and bandwidth.

You can test and tune stubs and coax lines. You can manually determine velocity factor and impedances of transmission lines.

Adjust and test RF matching networks and RF amplifiers without applying power.

Has easy-to-read LCD logarithmic SWR bargraph and SWR meter for quick tuning.

Take it anywhere

Fully portable, take it anywhere -- on remote sites, up towers, on DX-peditions.

Has built-in “N-type” connector.

Includes Free N-to-SO-239 adaptor.

Use 10 AA Ni-MH or Ni-Cad or alkaline batteries (not included -- alkalines cannot be charged internally) or 110-240 VAC with optional MFJ-1312D.

Compact 4W x 2D x 6 3/4H inches.

Maritime and 600 Meter Coverage



MFJ-1778
G5RV, WIRE ANTENNA


$ 49.95 each
Covers all bands, 160-10 Meters with antenna tuner. 102 feet long, shorter than 80 Meter dipole. Use as inverted vee or sloper to be more compact. Use on 160 Meters as Marconi with tuner and ground. Handles full legal limit power. Add coax feedline -- get on the air!


MFJ-949E
TUNER, 300W, 1.8-30 MHZ, PEAK CROSS METER, DL,


$ 189.95 each
More Hams use MFJ-949s than any other antenna tuner in the world! Why? Because the worlds leading antenna tuner has earned a worldwide reputation for being able to match just about anything.

Full 1.8-30MHz Operation
Custom designed inductor switch, 1000 volt tuning capacitors, Teflon insulation washers and proper L/C ratio gives you arc-free no worries operation with up to 300 Watts 1.8 to 30 MHz.

Tunes any Antenna
Tunes out SWR on dipoles, verticals, inverted vees, random wires, beams, mobile whips, shortwave receiving antennas.... Nearly anything! Use coax, random wire or balanced lines. Has heavy duty 4:1 balun.

Custom Inductor Switch
The inductor switch is the most likely component to burn up in any antenna tuner. MFJs inductor switch in the MFJ-949E was custom designed to withstand the extremely high RF voltages and currents that are developed in your tuner.

8 Position Super Antenna Switch
Lets you select two coax fed antennas, random wire/balanced line or built-in dummy load through your MFJ-949E or direct to your transceiver.

More hams use MFJ-949s than any other antenna tuner in the world!
Has MFJs full size 3 inch lighted Cross Needle Meter (not a puny "meter" you cant read). Lets you easily read SWR, true peak forward and average reflected power simultaneously on 300 Watt or 30 Watt ranges. Lamp has on/off switch, requires 12 VDC or 110 VAC with MFJ-1312D, $14.95

QRM-Free PreTune
MFJs QRM-Free PreTune lets you pre-tune your MFJ-949E off-the-air into its built-in dummy load! Makes tuning your actual antenna faster and easier.

Plus much more!
Full size built-in non-inductive 50 Ohm dummy load, scratch-proof Lexan multi-colored front panel, superior cabinet and construction and more!


MFJ-223
COLOR GRAPHIC VNA ANTENNA ANALYZER, 1-60MHZ


$ 279.95 each
MFJ-223 1-60 MHz Color Graphic VNA Analyzer

Pocket-Size, Incredible Performance! Truly accurate SWR, R, X and Z!

This pocket-sized wonder breaks the mold for analyzer design with user-friendly convenience, top notch accuracy, and a vivid TFT multi-color display. Don`t let the size fool you, MFJ-223 is packed with all the VNAfeatures and performance you need!

For example, get data for SWR, resistance (R), reactance (X), and impedance magnitude (Z) delivered on a color-coded high-resolution bar-graph display or sharply defined swept-frequency plots.

Get continuous DDS frequency coverage with 100-Hz resolution and a full selection of tuning steps and sweeps.

There`s a movable marker that calls up alpha-numeric data for any point on any plot -- and a memory to capture current data when you turn the analyzer off.

Get other useful features too, like a built in help menu and a field-strength indicator warns when powerful interference is present.

Best of all, juggling batteries is a thing of the past -- a long-running lithium-polymer power source is built right in. Recharge via any USB port.

Checkout these specifications:
• Single-frequency and swept frequency operating modes
• Truly accurate SWR, R, X, and Z measurements
• Seamless DDS coverage with 100-Hz resolution from 1-60 MHz
• Smooth "skip-free" encoder tunes fast or slow without missing a step
• Powerful +5-dBm stimulus generator overrides local interference
• Field-strength meter measures local signals, detects potential interference
• DDS generator precision signal source
• Vivid 1600-pixel/inch color graphics on a 2x2 inch non-glare TFTscreen
• High-lumen output, easy to read in direct sunlight
• Easy setup, only four control switches with convenient on-screen soft menus
• Personalized ID function programs your call or name onto the display
• Built-in 3.7-V 1800- mAH lithium-polymer battery charges with Battery Status Indicator and Auto Shut-off.
Optional MFJ-5431, Micro USB to USB Charge Cable.

• Charge % always displayed, multi-color LED monitors charge status
• Built-in clock shows elapsed time when unit is turned on
• Breakthrough miniaturization

2 3/4W x 3 1/2H x 1 3/8D" high-impact case, 5.1 oz.

• Has BNC connector.

BNC Male to SO-239 Adapter Included, MFJ-7708



MFJ-259C
HF/VHF/220 MHZ, .53-230 MHZ, SWR ANALYZER


$ 299.95 each


MFJ-259C 530 KHz - 230 MHz SWR Analyzer
World’s most popular SWR analyzer is super easy-to-use

The famous MFJ-259C gives you a complete picture of your antenna’s performance. You can read your antenna’s SWR and Complex Impedance 530 KHz to 230 MHz continuously with no gaps.

You can read Complex Impedance as series resistance and reactance (R+jX) or as magnitude (Z) and phase (degrees).

Determine velocity factor, coax loss in dB, coax length and distance to a short/open.

Read SWR, return loss and reflection coefficient at any frequency simultaneously.

You can read inductance in uH and capacitance in pF at RF frequencies.

Large easy-to-read two line LCD screen and side-by-side analog meters clearly display your information.

Built-in frequency counter, Ni-MH/Ni-CD charger circuit, battery saver, low battery warning and smooth reduction drive tuning.

Super easy to use! Just set the bandswitch and tune the dial -- just like your transceiver. SWR and Complex Impedance are displayed instantly!

Here’s what you can do

Find your antenna’s true resonant frequency. Trim dipoles and verticals.

Adjust your Yagi, quad, loop and other antennas, change antenna spacing and height and watch SWR, resistance and reactance change instantly. You’ll know exactly what to do by simply watching the display.

Perfectly tune critical HF mobile antennas in seconds for super DX -- without subjecting your transceiver to high SWR.

Measure your antenna’s 2:1 SWR bandwidth on one band, or analyze multiband performance.

Check SWR outside the ham bands without violating FCC rules.

Take guesswork out of building and adjusting matching networks and baluns.

Accurately measure distance to short or open in failed coax. Measure length of a roll of coax, coax loss, velocity factor and impedance.

Measure inductance, capacitance. Troubleshoot and measure resonant frequency, Q of traps, stubs, transmission lines, chokes, tuned circuits, baluns.

Adjust your antenna tuner for a perfect 1:1 match without creating QRM.

MFJ-259C is a complete ham radio test station with frequency counter, RF signal generator, SWR/Resistance/Reactance/Coax Analyzer, Capacitance/Inductance Meter and much more!

Use 10 AA or Ni-MH batteries (not included) or 110 VAC with optional MFJ-1312D.

Compact 4W x 6 3/4H x 2D inches


MFJ-269CPRO
HF/VHF/UHF SWR ANALYZER, .530-230 MHZ,430-520


$ 429.95 each
MFJ-269CPro Like MFJ-269C, but has its UHF range coverage 430 to 520 MHz and an extended commercial-style cabinet for lab work (helps protect knobs and connectors from damage.

530KHz-230MHz plus 415-470MHz HF/VHF/UHF SWR Analyzer

Covers 530 KHz-230 MHz and 415-470 MHz . . . SWR . . . Complex RFImpedance: Resistance(R)
and Reactance(X) or Magnitude(Z) and Phase(degrees) . . . Coax cable loss(dB) . . . Coax cable
length and Distance to fault . . . Return Loss . . . Reflection Coefficient . . . Inductance . . . Capacit-
ance . . . Battery Voltage. LCD digital readout . . . frequency counter . . . side-by-side meters . . . Ni-
MH/Ni-Cad charger circuit . . . battery saver . . . low battery warning . . . smooth reduction drive . . .

MFJ-269C covers 530KHz to 230 MHz and 415 to 470 MHz -- an MFJ-269C exclusive! Includes all the features of MFJ-259C, the world’s most popular SWR Analyzer plus much more!

Large easy-to-read two line LCD display and side-by-side meters clearly display your
information. Built-in Ni-Cad/Ni-MH charger circuit, battery saver, low battery warning, smooth reduction drive tuning.Use as signal source for testing/alignment.

Built-in CoaxCalculator -- calculates coax line length in feet given coax length in electrical degrees and vice versa for any frequency and any velocity factor (great for building matching sections and phasing lines) -- an MFJ-269C exclusive!

New 12-bit A/D converter gives much better accuracy and resolution than common 8-bit A/D converters -- an MFJ-269C exclusive!

Super easy to use! Just set the bandswitch and tune the dial -- just like your transceiver.

530 KHz to 230 MHz Range Features

MFJ-269C gives you a complete picture of your antenna. Read antenna SWR and Complex Imped-ance 530 KHz to 230 MHz. Built-in frequency counter.

Lower band is retuneable to cover 470-940 KHz for maritime and 600 Meters.

Read Complex Impedance as series equivalent resistance and reactance (Rs+jXs) or as magnitude (Z) and phase (degrees).

Also reads parallel equivalent resistance and reactance (Rp+jXp) --MFJ-269C exclusive!

Determine velocity factor, coax loss in dB, length of coax and distance to short/open in feet.

Read SWR, return loss and reflection coefficient at any frequency simultaneously at a single glance. Also reads match efficiency.

Also read inductance in uH and capacitance in pF at RF frequencies.

Measure SWR and loss of coax with any characteristic impedance, 10 to over 600 Ohms, including 50, 51, 52, 53, 73, 75, 93,95,300,450 Ohms -- MFJ-269C exclusive!

415 to 470 MHz Range features

Just plug in your UHF antenna coax, set the frequency and read SWR, return loss and reflection coefficient simultaneously. You can read coax cable loss in dB and match efficiency.

You can adjust UHF dipoles, verticals, yagis, quads and other antennas and determine their SWR, resonant frequency and bandwidth.

You can test and tune stubs and coax lines. You can manually determine velocity factor and impedances of transmission lines.

Adjust and test RF matching networks and RF amplifiers without applying power.

Has easy-to-read LCD logarithmic SWR bargraph and SWR meter for quick tuning.

Take it anywhere

Fully portable, take it anywhere -- on remote sites, up towers, on DX-peditions.

Has built-in “N-type” connector.

Includes Free N-to-SO-239 adaptor.

Use 10 AA Ni-MH or Ni-Cad or alkaline batteries (not included -- alkalines cannot be charged internally) or 110-240 VAC with optional MFJ-1312D.

Compact 4W x 2D x 6 3/4H inches.

Maritime and 600 Meter Coverage


MFJ-962D
ANTENNA TUNER, 1.5 KW, 1.8-30 MHZ, CN M, SW, BL


$ 319.95 each
Why settle for a mere 300 Watt antenna tuner when a few extra dollars lets you add real power when youre ready? The MFJ-962D lets you use your barefoot rig now. When youre ready . . you can add a powerhouse linear amplifier at no additional cost. The compact MFJ-962D handles 1500 Watts PEP SSB amplifier input power (800 Watts PEP SSB amplifier output power). Its perfect for Ameritrons best selling 800 Watt AL-811H or 600 Watt AL-811 amplifiers!

MFJ-962D is new and improved! New features include MFJs AirCore Roller Inductor, new aluminum-skirted knob set including a weighted deluxe spinner knob, ultra compact size (10.75 x 4 x 10.875 inches) and scratch-proof multi-colored Lexan front panel. Two transmitting tuning capacitors and MFJs exclusive AirCore roller inductor gives you precise control to get your SWR down to an absolute minimum.

You get an extremely wide matching range from 1.8 to 30 MHz continuously including MARS and WARC bands.MFJs AirCore roller inductor has an air core that cant burn up. You get ultra high-Q, low loss and MFJs exclusive Self-Resonance Killer that eliminates damaging self-resonances.

MFJs lighted peak and average reading Cross-Needle SWR/Wattmeter makes tuning quick and easy. At one glance you can read SWR, forward and reflected power in two power ranges. Meter light uses 12 VDC or 110 VAC with MFJ-1312D. A 6-position ceramic antenna switch lets you select 2 coax lines (direct or through tuner), random wire and balanced lines. You get a heavy duty MFJ TrueCurrentBalun for balanced lines. High-voltage ceramic feedthru insulators let you operate high power into balanced feedlines.


DOWNLOAD
Your New MFJ 2017
Ham Radio Catalog

HERE!

140 Pages of MFJ, Ameritron, Hygain, Cushcraft, Mirage and Vectronics Products!

REQUEST PRINT CATALOG!


MFJ-969
TUNER, HF+6M, 300W, ROLLER, DL, XMTR, ANT SW.


$ 229.95 each


The MFJ-969 Antenna Tuner gives you MFJs superb AirCore Roller Inductor and full 6 meteres through 160 Meter coverage!
You get everything youve ever wanted including...300 Watts PEP SSB full featured antenna tuner, widest matching range, full size lighted Cross-Needle SWR/Wattmeter reads true peak forward power, QRM-Free PreTune, 8 Position antenna switch, built in 50 Ohm dummy load, heavy duty 4:1 balun -- all in a tough, attractive cabinet. MFJs famous 1 year No Matter What warranty.

The MFJ-969 Antenna Tuners AirCore Roller Inductor, gear driven turns counter and spinner knob gives you exact inductance control for absolute minimum SWR. MFJs exclusive AirCore Roller Inductor has an air core that cant burn up! You get ultra-high-Q, the lowest loss, highest efficiency and highest power handling of any roller inductor in ham radio.

MFJs exclusive Self-Resonance Killer Keeps potentially damaging self-resonances away from your frequency. Huge self-cleaning wiping contact gives you excellent low-resistance connection without contact arcing or burning.
Solid 1/4 inch brass shaft, self-align bearings -- smooth non-binding operation.

The MFJ-969 Antenna Tuner covers all frequencies from 160 Meters thru 6 Meters, including the "magic band" -- the widest matching range of any full featured antenna tuner. Match dipoles, verticals, inverted vees, random wires, beams, mobile whips, SWL receiving antennas -- nearly any antenna. You can use coax cable, random wire or balanced lines. Has heavy duty 4:1 balun.

MFJs new ActivePeak reading Circuit accurately reads true peak forward power -- an MFJ exclusive.

MFJs lighted Cross Needle SWR/Wattmeter reads SWR, true peak forwards and average reflected power simultaneously on 300 Wat or 30 Watt ranges.
Lamp has on/off switch and uses 12VDC or 110 VAC with MFJ-1312D ActivePeakReading Circuit can also use a 9 volt battery.

MFJs 8 positions let you select two coax fed antennas, random wire/balanced line or built-in dummy load for use through your MFJ-969 or direct to your rig.
MFJs QRM-Free-PreTune lets you pre-tune MFJ-969 off the air into a built in dummy load without causing QRM. Pre-tuning into a dummy load makes tuning your actual antenna quick and easy!

The MFJ-969 Antenna Tuner has a full size non-inductive 50 Ohm dummy load. Youll find it handy for tuning, testing, repairing rigs, setting power level, adjusting mic gain, etc.

The MFJ-969 has a new tough aluminum case has a scratch proof multi-colored lexan front panel. It measures a compact 3½H x 10½D x 9½W inches.


MFJ-281
SPEAKER, CLEAR TONE, 3.5 MM PLUG


$ 12.95 each
SSB FM, Am, and CW never sounded so crystal clear! Plug in this MFJ ClearTone speaker and bring out communication speech fidelity that you never knew existed.

It restores the smooth sound of sinewaves that CW naturally generates and make it easy to copy. THE MFJ-281 ClearTone speaker was carefully designed to improve the intelligibility of speech in the frequency range of 600 to 4000Hz while reducing undesirable noise, static, and hum.

A top grade 3 inch Mylar cone speaker is mounted in a well designed speaker baffle. A fine mesh metal grille allows sound to radiate without being muffled. Versatile swivel mounting bracket lets you direct sound where you want it. 8 Watts. 8 Ohms, 6ft cord, 3.5mm mono plug.

Compact 3 ¼" x 3" x 2 ¼".


MFJ-1026
DELUXE, NOISE CANCEL/ENHANCER/ANTENNA


$ 199.95 each
Wipe out noise and interference before it gets into your receiver with a 60 dB null!

Eliminate all types of noise -- severe power line noise from arcing transformers and insulators, fluorescent lamps, light dimmers, touch controlled lamps, computers, TV birdies, lightning crashes from distant thunderstorms, electric drills, motors, industrial processes.

It’s more effective than a noise blanker because interference much stronger than your desired signal can be completely removed without affecting your signal.

It works on all modes -- SSB, AM, CW, FM, frequences from BCB to lower VHF.

Null out strong QRM on top of weak rare DX and then work him! You can null out a strong local ham or AM broadcast station to prevent receiver from overloading.

Use MFJ-1026 as an adjustable phasing network. You can combine two antennas to give you various directional patterns.

Null out a strong interfering signal or peak a weak signal at a push of a button.

Easy-to-use! Plugs between transmitting antenna and transceiver. To null, adjust amplitude and phase controls for minimum S-meter reading or lowest noise. To peak, push reverse button.

Use built-in active antenna or an external one. MFJ’s exclusive Constant Amplitude Phase Control makes nulling easy.

RF-sense T/R switch automatically bypasses your transceiver when you transmit. Adjustable delay time. 12 VDC or 110 VAC with MFJ-1312D. Measures 6 1/2 X 1 1/2 X 6 1/4 inches.


MFJ-4230MV
COMPACT SWITCH PS, METER, 4-16V ADJ. 110/220VAC


$ 89.95 each
This is the world’s most compact switching power supply that also has a meter and adjustable voltage control.



Just 5" W x 2 ½" H x 6" D, it weighs only 3 lbs. -- it is the perfect pack-n-go power supply for field day, DXpeditions, camping, hiking or to pack for your next business trip or vacation to some far away place.

MFJ-4230MV gives you 25 Amps continuously or 30 Amps surge at 13.8 VDC. The voltage is front-panel adjustable from 4 to 16 Volts. MFJ-4230MV also has a selectable input voltage: choose from 120 or 240 VAC at 47 - 63 Hz.

A simple front-panel push-button switch lets you choose either Ampmeter or Voltmeter -- allows you to select Amps or Volts as you wish to read them.

MFJ-4230MV has an excellent 75% efficiency and extra low ripple and noise, < 100 mV. Awhisper-quiet fan cools by convection and forced air cooling.

Normal air-flow around the power supply is continuous and a heat sensor increases the fan speed when the temperature rises above 70 degrees celsius.

DC output is five way binding posts on the back of the MFJ-4230MV so you can power your dedicated HF, VHF or UHF transceiver with ease.

All MFJ switching power supplies are protected by MFJ’s famous NOMatterWhat™ one year limited warranty.

MFJ will repair or replace (at our option) your switching power supply no matter what for one complete year.






MFJ-4416C
BATTERY VOLTAGE BOOSTER,13.8VDC, 25A,INPUT 9-13.8V
$179.95 each



MFJ-949E
TUNER, 300W, 1.8-30 MHZ, PEAK CROSS METER, DL,
$189.95 each



MFJ-226
1-230 MHZ ANTENNA EXPERT TIMES GRAPHIC ANALYZER
$339.95 each



MFJ-4230MV
COMPACT SWITCH PS, METER, 4-16V ADJ. 110/220VAC
$89.95 each




All information, images, and documents on this website are the sole property of MFJ Enterprises, Inc. Any reuse or redistribution of the contents of this website are strictly forbidden without authorization from MFJ Enterprises, Inc.
LMR is a Registered Trademark of Times Microwave Systems!
Enter your callsign to see if you have an eQSL waiting!