0 items

Secure Checkout
All CategoriesANALYZERSM&P COAXIAL CABLEANTENNASNEW PRODUCTSCABLESREMOTE SHACK

Product Search
Site Menu

Sister Companies

Associated Companies






 Company News
Call Toll Free: 1-800-647-1800 or Call: 1-662-323-5869
NEW 2017 Summer/Fall Catalog!
Hamfest Location & Date
TBA

COMPANY NEWS:
(NEW) MFJ 6-Band Hexbeam Antenna!
MFJ to be exclusive US distributor of Messi & Paoloni Coax Cables!
SITE NEWS:
At 9 am GMT every Monday and Tuesday, we will be performing server reboots causing the systems to be down for approximately 10 to 15 minutes!

** FEATURED PRODUCTS **
MFJ-226
1-230 MHZ ANTENNA EXPERT TIMES GRAPHIC ANALYZER

$ 339.95 each


Graphical Impedance Antenna Analyzer Review/Demo

MFJ VNA Antenna Analyzer covers 1 to 230 MHz, 1Hz resolution.

•Frequency sweep plots: SWR, Impedance, Resistance, Reactance,Phase Angle, Complex Return Loss, Smith Chart
•Sign of reactance
•Amazing accuracy with OSL(Open-Short-Load) calibration.

New MFJ-226 introduces the MFJ Times Technology series of advanced Antenna Analyzers!

This groundbreaking VNA antenna analyzer -- MFJ-226 Antenna Expert -- delivers OSL calibration and true reactance including its sign from 1 MHz to 230 MHz with 1-Hz frequency resolution!

Incredibly Powerful MFJ-226 is the first and only low-cost handheld VNA(Vector Network Analyzer) to feature OSL(open/short/load) calibration for super accuracy and sign of reactance to positively identify inductive or capacitive reactance.

These two features, normally only found on lab instruments, place incredible diagnostic power in the palm of your hand.

With it, you`ll measure impedance plus many other critical load parameters directly or through a feed-line or test cable with exceptional accuracy, correcting for line loss and phase angle.

Single Frequency Mode
Presents an unusually wide range of load information including . . .
SWR
Frequency
Impedance Magnitude
Series and Parallel Impedance (R±jX)
S11 (Rectangular and Polar)
Capacitance
Inductance

Swept-Frequency Mode
Generates, displays, captures accurate plots versus frequency of
SWR
Impedance (Z)
Resistance (R)
Reactance (±X)
Return Loss (S11)
Phase Angle
Smith Chart
SmithChart plot shows S11 magnitude and phase angle over any frequency span you specify.

32 Memories
32 memories let you capture screens made in the field for download into your PC via mini USB port for later storage and use.

Store OSL Calibrations
You can run OSL calibrations through your test cable or feed-line or at different frequencies and store them for future use.

Fits Your Hand Perfectly
Better doesn`t mean bigger! The MFJ-226`s compact and virtually indestructible molded case fits your hand perfectly with real back-lit keys that depress to give you tactile feedback.

Easy-to-read Backlit LCD
Bright 2 1/2 inch LCD backlit screen is easy-to-read, even in direct sunlight.

Use two AA batteries
Use disposable Alkaline or rechargeable NiMH AA batteries (not included).
Firmware upgradeable via USB port.
Includes N-to-SO-239 adapter and 48-inch mini USB to USB cable.

3 1/4W x 6 1/2H x 1D inches.
9.3 ounces.

Looks, Feels, Performs Like a Professional Instrument

MFJ-226 has both the hefty feel and advanced performance of a professional field-service instrument costing hundreds or even thousands of dollars more.

If you`ve ever wished for the accuracy and flexibility of a professional-grade S11 VNA without the boat-anchor packaging and prohibitive price, your search ends here. The MFJ-226 pulls together the latest advances in RF technology and delivers them to you at a price you can`t afford to pass up!









MFJ-939I
PLUG,PLAY,200W AUTOTUNER, HF,W/CABLE,ICOM


$ 159.95 each


Plug & Play Auto Tuner

Plug & Play! You won’t even know it’s there . . . MFJ-939I/K/Y automatically tunes your antenna as you tune your radio. SWR is just always low.

Tunes your coax fed or random wire antennas 1.8-30 MHz from 2 Watts QRP to full 200 Watts SSB/CW.

Matches 6-1600 Ohms (SWR up to 32:1) -- that’s a 50% wider matching range than competing products that are less capable and higher priced . . . and it’s made in the USA.

Highly intelligent, ultra-fast tuning!
As you’re ragchewing, contesting or DXing, the MFJ-939 is learning your antenna and the way you operate and storing all this in its 20,000 memories. The more you use it, the more it learns.

Measure & Compute = Instant Match
MFJ-939 uniquely measures your antenna’s complex impedance (R, X), computes the L-network and snaps in needed components for instant matching.

AdaptiveSearch
AdaptiveSearch determines a sub-set of all solutions that can provide a safe match and searches only that subset giving
you an ultra fast match. Others search slowly through all solutions.

InstantRecall
InstantRecall first checks its memory to see if you have operated this frequency before. If so, tuning is instantaneous and you’re ready to go!

MFJ VirtualAntenna Memory
MFJ exclusive VirtualAntenna Memory system gives you 8 antenna memory banks of 2500 memories each.
You can use an antenna switch to select up to 8 antennas and assign each antenna its own 2500 memories!

4 Times More Solutions and Faster!
MFJ has 256 values each of capacitance and inductance for 131,072 matching solutions giving you a finely tuned very low SWR. That`s 4 times the 32,768 solutions of competitors using only 128 L/C values each!
Don`t be fooled by competing products claiming fast search times -- if you have a quarter of the matching solutions, of course,it takes less time to finish but it`s not faster.
MFJ`s faster speed comes from advanced technology and software algorithms not from fewer solutions.

Audio SWR Meter
An Audio SWR meter beeps when SWR <1.5, 2, 2.5, 3. Alarms if >3. Audible & Visible Diagnostic messages.

Heavy-Duty Components
Heavy-duty L-network: 10 Amp/1000V relays, RF duty silver mica caps won’t burn up. Safe, reliable, continuous 200W SSB/CW.

As Small as Your Radio
Tiny 6 1/2W x 2 7/8H x 8 3/8D”. 2.4 lbs. SO-39s, random wire ant. & gnd posts.

Never Obsolete . . . Super Versatile
Truly Plug & Play! No settings, only one cable to plug in! Order MFJ-939I, Icom; MFJ-939K, Ken; MFJ-939Y, Yaesu. Specify Yaesu: FT-100/450/950/ 857/897/1000MP/9000/2000 or other.

Never Obsolete!

If you get a new transceiver, simply order a new Plug and Play cable.

Super Versatile! Works with ALL older rigs, classic transmitters, Flex, Elecraft, Tentec, QRP, others. Auto tune antenna -- touch tune button on any MFJ-939I/K/Y for any rig.

2-Year NoMatterWhatWarranty









MFJ-949E
TUNER, 300W, 1.8-30 MHZ, PEAK CROSS METER, DL,


$ 189.95 each
More Hams use MFJ-949s than any other antenna tuner in the world! Why? Because the worlds leading antenna tuner has earned a worldwide reputation for being able to match just about anything.

Full 1.8-30MHz Operation
Custom designed inductor switch, 1000 volt tuning capacitors, Teflon insulation washers and proper L/C ratio gives you arc-free no worries operation with up to 300 Watts 1.8 to 30 MHz.

Tunes any Antenna
Tunes out SWR on dipoles, verticals, inverted vees, random wires, beams, mobile whips, shortwave receiving antennas.... Nearly anything! Use coax, random wire or balanced lines. Has heavy duty 4:1 balun.

Custom Inductor Switch
The inductor switch is the most likely component to burn up in any antenna tuner. MFJs inductor switch in the MFJ-949E was custom designed to withstand the extremely high RF voltages and currents that are developed in your tuner.

8 Position Super Antenna Switch
Lets you select two coax fed antennas, random wire/balanced line or built-in dummy load through your MFJ-949E or direct to your transceiver.

More hams use MFJ-949s than any other antenna tuner in the world!
Has MFJs full size 3 inch lighted Cross Needle Meter (not a puny "meter" you cant read). Lets you easily read SWR, true peak forward and average reflected power simultaneously on 300 Watt or 30 Watt ranges. Lamp has on/off switch, requires 12 VDC or 110 VAC with MFJ-1312D, $14.95

QRM-Free PreTune
MFJs QRM-Free PreTune lets you pre-tune your MFJ-949E off-the-air into its built-in dummy load! Makes tuning your actual antenna faster and easier.

Plus much more!
Full size built-in non-inductive 50 Ohm dummy load, scratch-proof Lexan multi-colored front panel, superior cabinet and construction and more!


MFJ-1026
DELUXE, NOISE CANCEL/ENHANCER/ANTENNA


$ 199.95 each
Wipe out noise and interference before it gets into your receiver with a 60 dB null!

Eliminate all types of noise -- severe power line noise from arcing transformers and insulators, fluorescent lamps, light dimmers, touch controlled lamps, computers, TV birdies, lightning crashes from distant thunderstorms, electric drills, motors, industrial processes.

It’s more effective than a noise blanker because interference much stronger than your desired signal can be completely removed without affecting your signal.

It works on all modes -- SSB, AM, CW, FM, frequences from BCB to lower VHF.

Null out strong QRM on top of weak rare DX and then work him! You can null out a strong local ham or AM broadcast station to prevent receiver from overloading.

Use MFJ-1026 as an adjustable phasing network. You can combine two antennas to give you various directional patterns.

Null out a strong interfering signal or peak a weak signal at a push of a button.

Easy-to-use! Plugs between transmitting antenna and transceiver. To null, adjust amplitude and phase controls for minimum S-meter reading or lowest noise. To peak, push reverse button.

Use built-in active antenna or an external one. MFJ’s exclusive Constant Amplitude Phase Control makes nulling easy.

RF-sense T/R switch automatically bypasses your transceiver when you transmit. Adjustable delay time. 12 VDC or 110 VAC with MFJ-1312D. Measures 6 1/2 X 1 1/2 X 6 1/4 inches.


MFJ-269CPRO
HF/VHF/UHF SWR ANALYZER, .530-230 MHZ,430-520


$ 429.95 each
MFJ-269CPro Like MFJ-269C, but has its UHF range coverage 430 to 520 MHz and an extended commercial-style cabinet for lab work (helps protect knobs and connectors from damage.

530KHz-230MHz plus 415-470MHz HF/VHF/UHF SWR Analyzer

Covers 530 KHz-230 MHz and 415-470 MHz . . . SWR . . . Complex RFImpedance: Resistance(R)
and Reactance(X) or Magnitude(Z) and Phase(degrees) . . . Coax cable loss(dB) . . . Coax cable
length and Distance to fault . . . Return Loss . . . Reflection Coefficient . . . Inductance . . . Capacit-
ance . . . Battery Voltage. LCD digital readout . . . frequency counter . . . side-by-side meters . . . Ni-
MH/Ni-Cad charger circuit . . . battery saver . . . low battery warning . . . smooth reduction drive . . .

MFJ-269C covers 530KHz to 230 MHz and 415 to 470 MHz -- an MFJ-269C exclusive! Includes all the features of MFJ-259C, the world’s most popular SWR Analyzer plus much more!

Large easy-to-read two line LCD display and side-by-side meters clearly display your
information. Built-in Ni-Cad/Ni-MH charger circuit, battery saver, low battery warning, smooth reduction drive tuning.Use as signal source for testing/alignment.

Built-in CoaxCalculator -- calculates coax line length in feet given coax length in electrical degrees and vice versa for any frequency and any velocity factor (great for building matching sections and phasing lines) -- an MFJ-269C exclusive!

New 12-bit A/D converter gives much better accuracy and resolution than common 8-bit A/D converters -- an MFJ-269C exclusive!

Super easy to use! Just set the bandswitch and tune the dial -- just like your transceiver.

530 KHz to 230 MHz Range Features

MFJ-269C gives you a complete picture of your antenna. Read antenna SWR and Complex Imped-ance 530 KHz to 230 MHz. Built-in frequency counter.

Lower band is retuneable to cover 470-940 KHz for maritime and 600 Meters.

Read Complex Impedance as series equivalent resistance and reactance (Rs+jXs) or as magnitude (Z) and phase (degrees).

Also reads parallel equivalent resistance and reactance (Rp+jXp) --MFJ-269C exclusive!

Determine velocity factor, coax loss in dB, length of coax and distance to short/open in feet.

Read SWR, return loss and reflection coefficient at any frequency simultaneously at a single glance. Also reads match efficiency.

Also read inductance in uH and capacitance in pF at RF frequencies.

Measure SWR and loss of coax with any characteristic impedance, 10 to over 600 Ohms, including 50, 51, 52, 53, 73, 75, 93,95,300,450 Ohms -- MFJ-269C exclusive!

415 to 470 MHz Range features

Just plug in your UHF antenna coax, set the frequency and read SWR, return loss and reflection coefficient simultaneously. You can read coax cable loss in dB and match efficiency.

You can adjust UHF dipoles, verticals, yagis, quads and other antennas and determine their SWR, resonant frequency and bandwidth.

You can test and tune stubs and coax lines. You can manually determine velocity factor and impedances of transmission lines.

Adjust and test RF matching networks and RF amplifiers without applying power.

Has easy-to-read LCD logarithmic SWR bargraph and SWR meter for quick tuning.

Take it anywhere

Fully portable, take it anywhere -- on remote sites, up towers, on DX-peditions.

Has built-in “N-type” connector.

Includes Free N-to-SO-239 adaptor.

Use 10 AA Ni-MH or Ni-Cad or alkaline batteries (not included -- alkalines cannot be charged internally) or 110-240 VAC with optional MFJ-1312D.

Compact 4W x 2D x 6 3/4H inches.

Maritime and 600 Meter Coverage


MFJ-941E
TUNER, HF, 300 WATTS, WITH MINI CROSS METER


$ 149.95 each
The MFJ-941E gives you a 300 Watt antenna tuner that covers everything from 1.8 - 30 MHz -- plus you get a lighted Cross-Needle meter with on/off switch, antenna switch and a 4:1 balun! (The light uses 12 VDC or 110 VAC with MFJ-1312D)

MFJs lighted Cross-Needle meter shows SWR, forward and reflected power all at a glance in 300/60 and 30/6 watt ranges, 8 position antenna switch lets you select 2 coax lines, random wire/balanced line or dummy load (direct or through).

An efficient 12 position airwound inductor gives lower losses and more power out. Has 4:1 balun, 1000 Volt capacitors. The beautiful aluminum cabinet has a durable scratch-proof multicolor Lexan front panel matches your rig perfectly and fits right into your station.


MFJ-259C
HF/VHF/220 MHZ, .53-230 MHZ, SWR ANALYZER


$ 299.95 each


MFJ-259C 530 KHz - 230 MHz SWR Analyzer
World’s most popular SWR analyzer is super easy-to-use

The famous MFJ-259C gives you a complete picture of your antenna’s performance. You can read your antenna’s SWR and Complex Impedance 530 KHz to 230 MHz continuously with no gaps.

You can read Complex Impedance as series resistance and reactance (R+jX) or as magnitude (Z) and phase (degrees).

Determine velocity factor, coax loss in dB, coax length and distance to a short/open.

Read SWR, return loss and reflection coefficient at any frequency simultaneously.

You can read inductance in uH and capacitance in pF at RF frequencies.

Large easy-to-read two line LCD screen and side-by-side analog meters clearly display your information.

Built-in frequency counter, Ni-MH/Ni-CD charger circuit, battery saver, low battery warning and smooth reduction drive tuning.

Super easy to use! Just set the bandswitch and tune the dial -- just like your transceiver. SWR and Complex Impedance are displayed instantly!

Here’s what you can do

Find your antenna’s true resonant frequency. Trim dipoles and verticals.

Adjust your Yagi, quad, loop and other antennas, change antenna spacing and height and watch SWR, resistance and reactance change instantly. You’ll know exactly what to do by simply watching the display.

Perfectly tune critical HF mobile antennas in seconds for super DX -- without subjecting your transceiver to high SWR.

Measure your antenna’s 2:1 SWR bandwidth on one band, or analyze multiband performance.

Check SWR outside the ham bands without violating FCC rules.

Take guesswork out of building and adjusting matching networks and baluns.

Accurately measure distance to short or open in failed coax. Measure length of a roll of coax, coax loss, velocity factor and impedance.

Measure inductance, capacitance. Troubleshoot and measure resonant frequency, Q of traps, stubs, transmission lines, chokes, tuned circuits, baluns.

Adjust your antenna tuner for a perfect 1:1 match without creating QRM.

MFJ-259C is a complete ham radio test station with frequency counter, RF signal generator, SWR/Resistance/Reactance/Coax Analyzer, Capacitance/Inductance Meter and much more!

Use 10 AA or Ni-MH batteries (not included) or 110 VAC with optional MFJ-1312D.

Compact 4W x 6 3/4H x 2D inches


MFJ-1835
COBWEB,HF,1/2 WAVE, 5-BD,10,12,15,17,20 M,300W


$ 219.95 each
Product Being Replaced by MFJ-1836


1/2-wave, 5-Band HF Cobweb Antenna

Restricted space spoiling your operating fun? MFJ-1835 puts your call back on the map!

This fiveband (20, 17, 15, 12, 10 Meters) half-wave open-loop is perfect for restricted space or portable operation.

Sky-gray fiberglass spreaders and nearly invisible wire elements (13ft diagonal), blend in with your surroundings while standing tough against nasty weather.

Horizontally polarized for less local noise pickup plus solid gain over verticals.

No radials needed! Low SWR is due to MFJ’s exclusive Spider-Match broadband network.

Up to 5 dBi gain will allow you to work DX easily -- even on QRP.

Radiation pattern is nearly omni-directional so you don’t need a rotator.

Use lightweight TV hardware to mount it on your chimney, balcony, fence post or other. SO-239 feedpoint.

It’s small in size, just 8 lbs., low in cost, but big on performance. Let the MFJ-1835 turn your space problem into a fresh stack of QSL cards from far away places.




MFJ-1778
G5RV, WIRE ANTENNA


$ 49.95 each
Covers all bands, 160-10 Meters with antenna tuner. 102 feet long, shorter than 80 Meter dipole. Use as inverted vee or sloper to be more compact. Use on 160 Meters as Marconi with tuner and ground. Handles full legal limit power. Add coax feedline -- get on the air!


MFJ-1919EX
ANTENNA STAND, 18MAX 5MIN, W/FG , QUICK CLAMPS


$ 159.95 each
Due to the telescoping fiberglass mast size after being fully extended the capacity is capped at 15lbs. This mast will extend up to 18 feet! The base extends to 693 inches squared.

Stand
- 7.8` extended, 1.4" diameter.

- 54" collapsed, 6" diameter.

- 9 ¾ lbs.

Telescoping Mast
- 18` extended, ¾" diameter top, 1 ½" diameter bottom.

- 5` collapsed, 1 ½" diameter.

- 15 lbs.

The MFJ-1919 comes without the extendable telescoping mast.

The MFJ-1918EX is smaller, lighter, and and more portable antenna tripod.


DOWNLOAD
Your New MFJ 2017
Ham Radio Catalog

HERE!

140 Pages of MFJ, Ameritron, Hygain, Cushcraft, Mirage and Vectronics Products!

REQUEST PRINT CATALOG!


MFJ-962D
ANTENNA TUNER, 1.5 KW, 1.8-30 MHZ, CN M, SW, BL


$ 319.95 each
Why settle for a mere 300 Watt antenna tuner when a few extra dollars lets you add real power when youre ready? The MFJ-962D lets you use your barefoot rig now. When youre ready . . you can add a powerhouse linear amplifier at no additional cost. The compact MFJ-962D handles 1500 Watts PEP SSB amplifier input power (800 Watts PEP SSB amplifier output power). Its perfect for Ameritrons best selling 800 Watt AL-811H or 600 Watt AL-811 amplifiers!

MFJ-962D is new and improved! New features include MFJs AirCore Roller Inductor, new aluminum-skirted knob set including a weighted deluxe spinner knob, ultra compact size (10.75 x 4 x 10.875 inches) and scratch-proof multi-colored Lexan front panel. Two transmitting tuning capacitors and MFJs exclusive AirCore roller inductor gives you precise control to get your SWR down to an absolute minimum.

You get an extremely wide matching range from 1.8 to 30 MHz continuously including MARS and WARC bands.MFJs AirCore roller inductor has an air core that cant burn up. You get ultra high-Q, low loss and MFJs exclusive Self-Resonance Killer that eliminates damaging self-resonances.

MFJs lighted peak and average reading Cross-Needle SWR/Wattmeter makes tuning quick and easy. At one glance you can read SWR, forward and reflected power in two power ranges. Meter light uses 12 VDC or 110 VAC with MFJ-1312D. A 6-position ceramic antenna switch lets you select 2 coax lines (direct or through tuner), random wire and balanced lines. You get a heavy duty MFJ TrueCurrentBalun for balanced lines. High-voltage ceramic feedthru insulators let you operate high power into balanced feedlines.


MFJ-929
200W AUTO TUNER, LCD/MTR, 1.8-30MHZ


$ 229.95 each
The MFJ-929 IntelliTuner-Compact™ lets you automatically tune any coax fed or random wire antenna 1.8 - 30 MHz at full 200 Watts SSB/CW. It can match 6-1600 Ohms (SWR up to 32:1) - thats a 50% wider matching range at a higher power level than lesser competing products.

You get a digital SWR/Wattmeter with backlit LCD, antenna switch for 2 antennas, built-in radio interface and built-in internal BiasTee for remote tuner operation.

MFJs exclusive IntelliTune™, Adaptive Search™ and InstantRecall™ algorithms give you ultra-fast automatic tuning with over 20,000 VirtualAntenna™ Memories.

MFJ VirtualAntenna™ Memory

MFJ new VirtualAntenna™ Memory system gives you 4 antenna memory banks for each of 2 antenna connectors. You can select up to 4 antennas on each antenna connector. Each antenna has 2500 memories.

4 Times the Solutions!

MFJ-929 gives you 256 values each of capacitance and inductances for 131,072 matching solutions. Thats 4 times the 32,768 matching solutions of competing products with only 128 L/C values each!

Highly intelligent, ultra-fast tuning!

Don`t be fooled by competing products claiming fast search times -- if you have a quarter of the matching solutions, of course, it takes less time to finish but its not faster.

MFJ`s faster speed comes from advanced technology and software algorithms not from fewer matching solutions.

MFJ`s IntelliTuner-Compact™ actually measures complex impedance -- R and X --of your antenna, computes the L-network values needed and snaps in those components to give you an instant match.

If the load is out of measurement range, AdaptiveSearch™ determines the smaller sub-set from all solutions that can match a safe load -- and then searches only that subset -- others search through far more solutions.

Digital LCD SWR/Wattmeter

An easy-to-read, two-line, 16-character backlit LCD displays SWR, peak or average forward/reflected power, frequency, antenna 1 or 2, L/C tuner values, on/off indicators and other info. They are selected from easy-to-understand menus; not complex combinations of buttons you can`t remember.

A fast-response, high-resolution bargraph gives you an auto-ranging 20/200 Watt power meter. You get 60 segments each for forward and reflected power and 36 segments for SWR -- try that with an 8 segment bargraph that makes you change power ranges and doesn’t even give you reflected power!

You can read inductance and capacitance directly in uHy and pF. This turns you into an expert L-network designer! Match your load, read the resulting L/C values, then use them to build your fixed L-network.
Or, knowing the L/C values you can determine R and X of the load impedance.

StickyTune™ mode gives you one-hand tuning by locking the TUNE button; just transmit to tune regardless of SWR.


Has audio SWR meter and audio feed back. Competing products don`t. Built-in 50 MHz frequency counter. Its built-in radio interface lets you use a simple wire cable to compatible rigs. Others require a cable with expensive electronics. Binding post for random wire. Self-test. Highly efficient L-network. 10 Amp/1000V relays, RF duty silver mica capacitors.

6 ½" x 2 ¾" x 7 ½". 2.4 lbs. 12-15 VDC/ 1 Amp or 110 VAC with MFJ-1316.

Autotuner Interface Cables
MFJ-5114AMost Alinco
MFJ-5114KMost Kenwood
MFJ-5114IMost Icom
MFJ-5114YMost Yaesu
MFJ-5114Y2Yaesu FT-847 (MFJ-92X models only)
MFJ-5114Y3Yaesu FT-1000MP/2000/9000
MFJ-5114Y4Yaesu FT-2000 (through TX REQ input)


MFJ-269C
HF/VHF/220MHZ/UHF,.530-230,415-470MHZ,SWR ANALYZER


$ 399.95 each
530KHz-230MHz plus 415-470MHz HF/VHF/UHF SWR Analyzer



Covers 530 KHz-230 MHz and 415-470 MHz . . . SWR . . . Complex RFImpedance: Resistance(R)
and Reactance(X) or Magnitude(Z) and Phase(degrees) . . . Coax cable loss(dB) . . . Coax cable
length and Distance to fault . . . Return Loss . . . Reflection Coefficient . . . Inductance . . . Capacit-
ance . . . Battery Voltage. LCD digital readout . . . frequency counter . . . side-by-side meters . . . Ni-
MH/Ni-Cad charger circuit . . . battery saver . . . low battery warning . . . smooth reduction drive . . .

MFJ-269C covers 530KHz to 230 MHz and 415 to 470 MHz -- an MFJ-269C exclusive! Includes all the features of MFJ-259C, the world’s most popular SWR Analyzer plus much more!

Large easy-to-read two line LCD display and side-by-side meters clearly display your
information. Built-in Ni-Cad/Ni-MH charger circuit, battery saver, low battery warning, smooth reduction drive tuning.Use as signal source for testing/alignment.

Built-in CoaxCalculator -- calculates coax line length in feet given coax length in electrical degrees and vice versa for any frequency and any velocity factor (great for building matching sections and phasing lines) -- an MFJ-269C exclusive!

New 12-bit A/D converter gives much better accuracy and resolution than common 8-bit A/D converters -- an MFJ-269C exclusive!

Super easy to use! Just set the bandswitch and tune the dial -- just like your transceiver.

530 KHz to 230 MHz Range Features

MFJ-269C gives you a complete picture of your antenna. Read antenna SWR and Complex Imped-ance 530 KHz to 230 MHz. Built-in frequency counter.

Lower band is retuneable to cover 470-940 KHz for maritime and 600 Meters.

Read Complex Impedance as series equivalent resistance and reactance (Rs+jXs) or as magnitude (Z) and phase (degrees).

Also reads parallel equivalent resistance and reactance (Rp+jXp) --MFJ-269C exclusive!

Determine velocity factor, coax loss in dB, length of coax and distance to short/open in feet.

Read SWR, return loss and reflection coefficient at any frequency simultaneously at a single glance. Also reads match efficiency.

Also read inductance in uH and capacitance in pF at RF frequencies.

Measure SWR and loss of coax with any characteristic impedance, 10 to over 600 Ohms, including 50, 51, 52, 53, 73, 75, 93,95,300,450 Ohms -- MFJ-269C exclusive!

415 to 470 MHz Range features

Just plug in your UHF antenna coax, set the frequency and read SWR, return loss and reflection coefficient simultaneously. You can read coax cable loss in dB and match efficiency.

You can adjust UHF dipoles, verticals, yagis, quads and other antennas and determine their SWR, resonant frequency and bandwidth.

You can test and tune stubs and coax lines. You can manually determine velocity factor and impedances of transmission lines.

Adjust and test RF matching networks and RF amplifiers without applying power.

Has easy-to-read LCD logarithmic SWR bargraph and SWR meter for quick tuning.

Take it anywhere

Fully portable, take it anywhere -- on remote sites, up towers, on DX-peditions.

Has built-in “N-type” connector.

Includes Free N-to-SO-239 adaptor.

Use 10 AA Ni-MH or Ni-Cad or alkaline batteries (not included -- alkalines cannot be charged internally) or 110-240 VAC with optional MFJ-1312D.

Compact 4W x 2D x 6 3/4H inches.

Maritime and 600 Meter Coverage



MFJ-223
COLOR GRAPHIC VNA ANTENNA ANALYZER, 1-60MHZ


$ 279.95 each
MFJ-223 1-60 MHz Color Graphic VNA Analyzer

Pocket-Size, Incredible Performance! Truly accurate SWR, R, X and Z!

This pocket-sized wonder breaks the mold for analyzer design with user-friendly convenience, top notch accuracy, and a vivid TFT multi-color display. Don`t let the size fool you, MFJ-223 is packed with all the VNAfeatures and performance you need!

For example, get data for SWR, resistance (R), reactance (X), and impedance magnitude (Z) delivered on a color-coded high-resolution bar-graph display or sharply defined swept-frequency plots.

Get continuous DDS frequency coverage with 100-Hz resolution and a full selection of tuning steps and sweeps.

There`s a movable marker that calls up alpha-numeric data for any point on any plot -- and a memory to capture current data when you turn the analyzer off.

Get other useful features too, like a built in help menu and a field-strength indicator warns when powerful interference is present.

Best of all, juggling batteries is a thing of the past -- a long-running lithium-polymer power source is built right in. Recharge via any USB port.

Checkout these specifications:
• Single-frequency and swept frequency operating modes
• Truly accurate SWR, R, X, and Z measurements
• Seamless DDS coverage with 100-Hz resolution from 1-60 MHz
• Smooth "skip-free" encoder tunes fast or slow without missing a step
• Powerful +5-dBm stimulus generator overrides local interference
• Field-strength meter measures local signals, detects potential interference
• DDS generator precision signal source
• Vivid 1600-pixel/inch color graphics on a 2x2 inch non-glare TFTscreen
• High-lumen output, easy to read in direct sunlight
• Easy setup, only four control switches with convenient on-screen soft menus
• Personalized ID function programs your call or name onto the display
• Built-in 3.7-V 1800- mAH lithium-polymer battery charges with Battery Status Indicator and Auto Shut-off.
Optional MFJ-5431, Micro USB to USB Charge Cable.

• Charge % always displayed, multi-color LED monitors charge status
• Built-in clock shows elapsed time when unit is turned on
• Breakthrough miniaturization

2 3/4W x 3 1/2H x 1 3/8D" high-impact case, 5.1 oz.

• Has BNC connector.

BNC Male to SO-239 Adapter Included, MFJ-7708







MFJ-557
CODE OSCILLATOR WITH KEY
$39.95 each



MFJ-1919EX
ANTENNA STAND, 18MAX 5MIN, W/FG , QUICK CLAMPS
$159.95 each



MFJ-259C
HF/VHF/220 MHZ, .53-230 MHZ, SWR ANALYZER
$299.95 each



MFJ-4245MV
SWITCHING PS, 45AMPS, 12VDC, METERS, ADJ, LED LAMP
$149.95 each




All information, images, and documents on this website are the sole property of MFJ Enterprises, Inc. Any reuse or redistribution of the contents of this website are strictly forbidden without authorization from MFJ Enterprises, Inc.
LMR is a Registered Trademark of Times Microwave Systems!
Enter your callsign to see if you have an eQSL waiting!