Knowledgebase
MFJ Enterprises Inc. > Help Desk > Knowledgebase

MFJ-464 Hyperterminal for Windows

Solution

To setup and run HyperTerminal for Windows:

 

*) Click Start, point to Programs, point to Accessories,
   point to Communications, and then click HyperTerminal.
*) Connection Description window shows up, enter a name
   (such as MFJ-464), choose an icon, and click OK.
*) Connect To window shows up, in the Connect using field,
   select the COM port that you will connect the keyer to.
   Ignor the other fields, and make sure this COM port is
   not used by another program.  Click OK.
*) COM Properties window shows up, set Bits per second to
   9600, Data bits to 8, Parity to None, Stop bits to 1,
   and Flow control to Xon/Xoff.  Click OK.
*) On the HyperTerminal window, click File and then click
   Save.  Next time when you want to use HyperTerminal with
   these settings, click Start, point to Programs, point to
   Accessories, point to Communications, point to
   HyperTerminal, and then click MFJ-464.ht.
*) Now you should be connected to the keyer.  Typing inside
   HyperTerminal will key the keyer, and the receiving text
   will be shown on the window.  If it does not work, check
   your serial cable connection and make sure the COM port
   is not used by another program.
  
Article details
Article ID: 83
Company: MFJ
Date added: 2017-01-12 14:44:30
Views: 34

 
<< Go back